• Help Support Hardline Crawlers :

Water in tires

ecoast said:
what's easiest way to get the water out?


valve stem @ 6 o'clock and a small tube down inflator with valve removed?

break down tires/beadlocks?

drill and plug hole? :p lol


any ideas?

That is what I did. Got all but a gallon or so out. Have any idea how out of balance a set of tires is with 8 pound weights on them. Would get death wobble on road so bad you could not hold onto the steering wheel. So, I dismounted the tires, bailed them out, and dried with a towel.
 
ecoast said:
what's easiest way to get the water out?


valve stem @ 6 o'clock and a small tube down inflator with valve removed?

break down tires/beadlocks?

drill and plug hole? :p lol


any ideas?

Most places that put water in tired have a pump system the well put the water or ballast fluid and also pump it back out. But to get %100 out , you'll have to break down tire. Just thinking, you might be able to just knock the bead off of one side, then use a shop vac to get it out.
 
smbroady82 said:
What is the advantage to running water in atv tires? Just curious
Deep water riding. It's better to stay planted on bottom than having it float out from
Underneath you.
43c10dbde03ed2373226f393d8aa0070.jpg
 
Top