Sold/Expired WTB USA 6x6 pinion rotor.

[crawler nut]

WTB USA 6X6 pinion rotor for Rockwell.
Have one bent preaty bad, an looking for another or 2
What ya got ?

 

[Bigred350]

Good luck finding that. They went out of Buisness years ago. Most people run the Mazda and Toyota setup

 

[waggener1]

I don't have any for sale, however, I can provide you some information. The rotor you need fits the late 80's Mazda B2200 pickup truck. I use '88 since I know the parts counterman will ask. A local machine shop will be able to enlarge the rotor's I.D. to approximately 3.75". I made one last week. I recall it came out to 3.746". The four holes that match the pinion flange bolt pattern can be found by using a 1/2" transfer punch. With the holes drilled out to 17/32", you'll be ready to bolt up your new rotor. Hope this helps.

 

[crawler nut]

I don't have any for sale, however, I can provide you some information. The rotor you need fits the late 80's Mazda B2200 pickup truck. I use '88 since I know the parts counterman will ask. A local machine shop will be able to enlarge the rotor's I.D. to approximately 3.75". I made one last week. I recall it came out to 3.746". The four holes that match the pinion flange bolt pattern can be found by using a 1/2" transfer punch. With the holes drilled out to 17/32", you'll be ready to bolt up your new rotor. Hope this helps.

. Thanks for the info. I went ahead an bought a set from patooyee on the forum. Thanks again