My Junk

http://www.nw-wheelers.com/shopcam/

Looks like crash has traded in the Mt. Dew for the five gallon buckets of rockstar. :haha:

:haha::haha::haha:

So--if all goes as planned--I will be trying to fire it off tonight...

ooo, will it be live on Crashfab Shopcam ???

Boosted said:

ooo, will it be live on Crashfab Shopcam ???

Click to expand...

Oh ya---just look for the fire :haha:

I ran the fuel system last night to check for leaks (one loose hose clamp) so thats done and ready. Almost have the egr blockoff plates done and the intake is on.

So ya--should be able to attempt to fire it off tonight,,,,,

Damn I cant wait....

BTW, I was able to find someone else to run the driveshafts over to Best Driveline (yeah I know not your favorite) for me this afternoon so they should be ready to be picked up on Monday. I will have my friend call you so he can meet you somewhere Monday afternoon.

Thanks, Bill

hey crash i will be bringing up the throttle cable and pully up later today or tomarrow as i will be going over to my buddies house down the road from you sorry its been taking me so long.

Bill i havent been able to call you cause i ran my phone over like a dumb ass a week ago so i just found your number and ill be calling you.

almost not done said:

hey crash i will be bringing up the throttle cable and pully up later today or tomarrow as i will be going over to my buddies house down the road from you sorry its been taking me so long.

Bill i havent been able to call you cause i ran my phone over like a dumb ass a week ago so i just found your number and ill be calling you.

Click to expand...

I will be home both nights---sooner the better frankie :awesomework:

Frankie....call me asap so I dont have to have Simon take care of my driveshafts. I would much rather have you take care of them instead.

Thanks, Bill

somebody looking for one of these?

whats it worth to you?:fawkdancesmiley:

Well--I got everything ready--figured I would crank it till I got oil pressure--and god damn if the starter just goes CLICK!!! Check voltage---good. I rip the starter off and tear it apart--typical toyota grooved contacts so I clean it all up and test the now working starter.

I throw it back in and crank till I get oil pressure :awesomework:

Hook everyhting back up I unplugged--and the fawker fired off :cheer:

crash said:

Well--I got everything ready--figured I would crank it till I got oil pressure--and god damn if the starter just goes CLICK!!! Check voltage---good. I rip the starter off and tear it apart--typical toyota grooved contacts so I clean it all up and test the now working starter.

I throw it back in and crank till I get oil pressure :awesomework:

Hook everyhting back up I unplugged--and the fawker fired off :cheer:

Click to expand...

Cool about time

crash said:

Well--I got everything ready--figured I would crank it till I got oil pressure--and god damn if the starter just goes CLICK!!! Check voltage---good. I rip the starter off and tear it apart--typical toyota grooved contacts so I clean it all up and test the now working starter.

I throw it back in and crank till I get oil pressure :awesomework:

Hook everyhting back up I unplugged--and the fawker fired off :cheer:

Click to expand...

WAHOO!!! So Mike, did you get a knock sensor or do we still need one?

FRANKIE !!! CALL ME PLEASE !!!

Driveshafts are at Best Driveline. They will be ready Monday afternoon. Anything else we need Mike? You get the ARB stuff yet? Should I just order a complete ARB third with 4.88 gears so you can drop in? Lemme know....

Thanks, Bill

Frankie dropped off the cable and pully. I told him to get ahold of you...

As for the third--I am hoping chris gets ahold of me in the next day...

Gettin' closer 'eh??? Saweet!!! You get any teaser vid of the inaguraul firing of the motor???:stirpot:

oh man that motor sounds so sweet im almost jelouse ill call you first thing in the morning bill i promise.

crash said:

Frankie dropped off the cable and pully. I told him to get ahold of you...

As for the third--I am hoping chris gets ahold of me in the next day...

Click to expand...

Let me know asap, because if needed I can order a complete (assembled) ARB/4.88 third from TG.

The other option is to throw a spool in it for now....

So whats the latest news Mike? Did you get the ARB parts you needed? Shall I order the ARB install kit from TG? Want to throw a spool in there instead? Do I need to order a complete third?

Lemme know.... :;

BTW....Frankie, was good reading that you would be calling me....would be great if you actually do! :fawkdancesmiley: :haha:

Ok playing catchup--I have been working as hard as I can to get it DONE!!!

Here is the motor with all the vacuum ports plugged--I still need to make a vent hose from the valve cover to the throttle body.



Here are the EGR blockoff plates I made.

So frankie dropped off the throttle cable.



As you can see--MUCH longer.

Here is how I chose to install it--by simply drilling 2 holes.



Now I have also found this in the past--the distance from the firewall to the pedal assy is shorter on the 1st gen pickups so you will need to modify the arm on the pedal assy.

Stock form.



As you can see you just need to bend it a tad to give you some adjustment on the cable