Back to square one.......

[Bunk1]

Your further along than Maverick26 now!!!!!!!!

Now off to work, On my day off...

 

[megatoy66]

Excellent work Clark! looks great. :cool:

 

[sly-yota]

sorry, i'd have stopped by but first day at my new job today and all... uhg..having a job again sucks...:mad: looking good, i like how the mounts turned out, notice you changed them up a wee bit from when we were talking about them yesterday. :awesomework::corn:

 

[sarg]

are you going to run the truck intake. Also you can swap out the truck pan for a camero pan and it wouldnt stick down so far, oh and I have one for sale if you want it. Looking great Im going to look you up sometime when Im in the south end and come check it out:;

 

[Clark]

I've got an LS1 intake i'm going to use, as the truck intake sits about 1-2" too tall. I also have a Kevco Oilpan that should give me another 3"+ of clearance, just need to put it on.

I've got a fridge full of beer down here, so swing by anytime:beer:

 

[Binder]

Build looks great!:beer: May want to lockwire the engine mount bolts.:cheer:

 

[pokey]

I've got an LS1 intake i'm going to use, as the truck intake sits about 1-2" too tall. I also have a Kevco Oilpan that should give me another 3"+ of clearance, just need to put it on.

I've got a fridge full of beer down here, so swing by anytime:beer:

Your never there :booo:

 

[Brian H]

Your never there :booo:

He gets there when your going to bed old man. He is a night owl.

 

[jimboy]

trans mnt

why is the no crossmember for the trans mnt? are u gonna just weld it to the skidplate?

 

[ChrisStewart]

I've got an LS1 intake i'm going to use, as the truck intake sits about 1-2" too tall. I also have a Kevco Oilpan that should give me another 3"+ of clearance, just need to put it on.

I've got a fridge full of beer down here, so swing by anytime:beer:

Beer????????? It's never been there when I have showed up....... Anyway got the motor mounts you made for me put in the F-Toy. Thanks again.

 

[Clark]

Your never there :booo:

I'm probably working a real job, or sleeping when you show up old man:fawkdancesmiley:

Build looks great!:beer: May want to lockwire the engine mount bolts.:cheer:

Thanks!

why is the no crossmember for the trans mnt? are u gonna just weld it to the skidplate?

weld to the skid plate, it's how SN does it, so i'm going to roll with it.

Beer????????? It's never been there when I have showed up....... Anyway got the motor mounts you made for me put in the F-Toy. Thanks again.

I got a fridge, and now it's got beer.:beer::D More for guests than for me, but i can drink with the best of em.:flipoff:

 

[Maverick26]

Your further along than Maverick26 now!!!!!!!!

Now off to work, On my day off...

Haha, so you think. No one has seen my rig in a few months. :looser:

 

[Clark]

Not the mega progress like before, but i took out the atlas, and clocked it farther down, and cut the notch a little bigger. Also got the seats in and 1/2 mounted, all in double sheer.

 

[pos97TJ]

Looking good clark:awesomework:

 

[slednecks1124]

Are you going to put any "OH ****" handles in there? :corn:

 

[Clark]

yes.

 

[sly-yota]

lol WAY more room than before! now the atlas shifters arent stuck to the passenger seat and in the middle of the passengers left leg! oh and the seats arent touching now! :awesomework:

looking good man:corn:

 

[Money Mark]

You should gusset the seat brackets.:awesomework:

 

[sly-yota]

You should gusset the seat brackets.:awesomework:

thats what i was thinking, and maybe weld a plate on the sides to fill the gap and keep them from moving at all against eachother.:corn:

 

[Pook]

Looks alright for a cheater with a cnc plasma.

try doing it with zipdisks and grinders like a real fabricator :flipoff:

 

[jimboy]

Seat tabs are fine. Don't listen to money :haha:.

 

[Clark]

lol WAY more room than before! now the atlas shifters arent stuck to the passenger seat and in the middle of the passengers left leg! oh and the seats arent touching now! :awesomework:

looking good man:corn:

There is about twice as much room this time:awesomework:

You should gusset the seat brackets.:awesomework:

thats what i was thinking, and maybe weld a plate on the sides to fill the gap and keep them from moving at all against eachother.:corn:

I better remake all the seat tabs out of 1/4 then double sheer gusset them, and redrill the seats for 1/2" F911 Bolts.

Looks alright for a cheater with a cnc plasma.

try doing it with zipdisks and grinders like a real fabricator :flipoff:

:fawkdancesmiley:

Seat tabs are fine. Don't listen to money :haha:.

:beer:

 

[Cascade_Crawler]

are you worried about the belly pan bending where you put that big ass notch in the support tube?

 

[Clark]

nope, going to weld in some reinforcements when the drivetrain comes out again., plenty strong.:awesomework:

 

[Clark]

finished up another seat mount on the drivers, good enough to locate steering and brakes....

 

[MarcW]

you should really add some side panels in or you will be covered in mud:rolleyes:







:fawkdancesmiley: Dont you love it when re-todd's tell you how to build your rig when the ****er aint finished? :mad: :haha:

 

[Clark]

i'll take all the critisism, and use what i think's good, and ignore the rest. There's always someone who calls you out on the obvious like that.:redneck:

 

[dirtygoat]

Looks alright for a cheater with a cnc plasma.

try doing it with zipdisks and grinders like a real fabricator :flipoff:

:haha::haha::haha:


Lookin good Clark...

X2 on doing something to keep the mud out...:redneck:

 

[Not Jobless]

To hell with the brakes...where's the f'n skinny pedal :redneck:

 

[Clark]

made more progress but forgot the camera....:fawkdancesmiley: