• Help Support Hardline Crawlers :

Tube frame 4 seat buggy project in SC $6000 OBO

sparepartsdave

Well-Known Member
Joined
Feb 21, 2011
Messages
108
$6000 OBO Work and health issues have forced me to make the call. 4 seat project, 95 % of the frame is done. All 1 3/4 DOM .120 wall. 4 seater roughly 126 wheel base. Front and rear 4 link. CUCV axles, rear 14 bolt with disc conversion. Artec truss and pinion guard. 13 bolt cover and cut. Factory gears and locker. New calipers and pads. Front D60, Artec truss. Rough stuff high steer arms, 10 Factory axles. Loc Rite drop in. Ruff stuff diff cover. PSC ram mounted. New calipers and pads. Solid spicers. 1.25 Heims on all links.5/8 wall lowers, 1/4 wall uppers. Set up for small block Chevy. Lakewood scatter shield, SM465 32 spline. Custom re-clocked adapter to raise the NP205(32 spline conversion, on all shafts). Carolina drive line front shaft, double slip joint, 1410 on all joints, center carrier bearing. 1410 yokes on everything. PSC full hydro steering(new).Tilt wheel adapter with quick release. Propane set up, headers, exhaust, spin tech mufflers, courbeau seats( pretty used). I know I'm forgetting something, what ever I have to go with the buggy that's not listed below goes with it. $6000 OBO. You're basically getting the parts and a free buggy frame. I'm not parting it out, I don't have the time or space, buggy is selling as a whole.

I also have, but will not sell till the buggy is sold, so don't ask unless the buggy is marked sold. New Fox 2 inch bumps. New King 16 inch 2.5 diameter, remote reservoir shocks. 43 SX(used, but in good shape) on new race line 17 inch bead locks. Prices will be added after the buggy is sold. Buyer of the buggy gets first chance at the parts. Any messages about buying this stuff before the buggy is sold will be ignored.
 

Attachments

  • 20180108_112736.jpg
    20180108_112736.jpg
    1.3 MB · Views: 2,508
  • 20180108_112751.jpg
    20180108_112751.jpg
    1.5 MB · Views: 2,156
  • 20180108_112816.jpg
    20180108_112816.jpg
    1.4 MB · Views: 2,777
$6000 OBO Work and health issues have forced me to make the call. 4 seat project, 95 % of the frame is done. All 1 3/4 DOM .120 wall. 4 seater roughly 126 wheel base. Front and rear 4 link. CUCV axles, rear 14 bolt with disc conversion. Artec truss and pinion guard. 13 bolt cover and cut. Factory gears and locker. New calipers and pads. Front D60, Artec truss. Rough stuff high steer arms, 10 Factory axles. Loc Rite drop in. Ruff stuff diff cover. PSC ram mounted. New calipers and pads. Solid spicers. 1.25 Heims on all links.5/8 wall lowers, 1/4 wall uppers. Set up for small block Chevy. Lakewood scatter shield, SM465 32 spline. Custom re-clocked adapter to raise the NP205(32 spline conversion, on all shafts). Carolina drive line front shaft, double slip joint, 1410 on all joints, center carrier bearing. 1410 yokes on everything. PSC full hydro steering(new).Tilt wheel adapter with quick release. Propane set up, headers, exhaust, spin tech mufflers, courbeau seats( pretty used). I know I'm forgetting something, what ever I have to go with the buggy that's not listed below goes with it. $6000 OBO. You're basically getting the parts and a free buggy frame. I'm not parting it out, I don't have the time or space, buggy is selling as a whole.

I also have, but will not sell till the buggy is sold, so don't ask unless the buggy is marked sold. New Fox 2 inch bumps. New King 16 inch 2.5 diameter, remote reservoir shocks. 43 SX(used, but in good shape) on new race line 17 inch bead locks. Prices will be added after the buggy is sold. Buyer of the buggy gets first chance at the parts. Any messages about buying this stuff before the buggy is sold will be ignored.
@whiskeymakin
 

Latest posts

Top