Recent content by Blackout

I have a bad working stock heater haha. I've never been a big fan of the stock heaters in these trucks but it might just need to be gone threw. Right now it makes a bunch of blowing noise but I get no air movement. I won't know until I tear into it but if theres a better option I would like to...

I'm also interested in aftermarket heaters. I want to gut the dash out of my 85 toyota pickup and build a sheet metal buggy dash but upgrade the heater and still keep a couple vents and window defrost. Wondering what heater would be the best for something like that.

At the bottom right as the pavement ends there is a Y in the road. left side kind of goes along the side of the mtn and its blocked off by rocks at the bridge. the right side goes to the top of the mountain up around 3800 ft i believe

Heard the snow is all slushy and rained out except for the very top

By the way this is just a logging road so your supposed to have street legal rigs and theres no way I would leave a tow rig anywhere. I've seen more than one abandoned stolen or cars just burned around there.

Heard that it just got a ton of snow in the last couple days enough to bury 40's and never see gravel.

Good turn out there must have been 40+ rigs at its prime. Together we collected 88 toys! Big thanks to everyone who showed up and donated :beer:

I just upgraded to ifs wheel hubs and tacoma brakes on my rig but I was running solid axle hubs with vented rotors. The rotors should be resurfaced but theres plenty left. I'd let the rotors with the wheel hubs and bearings go for 30 and I can have my buddys shop resurface the rotors for another...

Last minute Bump :beer:

Sno Co Crawlers are putting on Toys for tots run at Walker Valley Sunday Dec 1st. Bring a toy and go wheelin! Be at main parking lot by 9-9:30-ish and we are planning on rolling out about 10

Hard to tell. Drive side looks shallow and coast side looks deep. ^ Try that and see if you can get a cleaner pattern. Get a picture of the paint transfer on the pinion for us that might help.

I have no experience with their front 3-links but if it's anything like their rear 3-links I hope your not going to drive this on the street. I have their 3-link in the rear of my 4runner and it leans soooo much. I am glad I have leafs in the front so when I brake and steer it has some stability...

Wow that trucks looking really good :awesomework:

I was invited by a group of friends that are going to be up there Saturday. Probably won't be taking my rig but I might be riding with someone. Might see you up there :beer: