Re:
I do powder coat so my suggestion would be start with aircraft stripper and if that does not cut it Columbia coatings has a stripper you can get by the gallon for about $50.
As a last resort b17 will remove anything and everything including your body parts so leave that for the pros.
Sent...
Re:
Truck pan and ported ls3 oil pump. I have never seen a pressure drop tilted any direction even at 7000 rpm.
I was told it would not work during my build so I built around it and made it work.
Sent from my SCH-R970 using Tapatalk
Re: Re: Re: Who stocks Fox 2.0 CO shim stacks on the east coast?
Just as a wild guess judging by your spring rates you are close to me in weight. Try this as it should get you in the ballpark and if it's stiff on the slow stuff use a flutter.
Front
90 compression
30 rebound
Rear
80...