Recent content by Trail Beast

I agree. But, I'd try the PB's

DON'T BE TAKING A FULL SIZE CHEVY TO LIBERTY! or any of the other tight trails! Especially Rimrock.

I figured you'd tell me where you lived if I was lending you my ****! LOL You're always welcome to come on up the Tulalip! I'm not too far off I-5

Hey Jamie! You could borrow mine if you want. I bought this stuff on ebay, & haven't used it yet. When it's time, I'll know where to find you. I've got about $150 into the spreader, & $275 on the R&P bearing tool kit with carrier. DANA 30-60 DIFFERENTIAL SPREADER TOOL "MADE IN THE USA"...

https://www.youtube.com/watch?v=BQgQIyIhI0o Sun shields wear thin, & trunion bearings wear. Life expectancy 100K +

So, does this area close Dec. 1st for Snowmobiles?

The reason 90% efficient + have a shorter life span is due to the corrosion of the moisture it harvests during it's burn. The seals, or parts that support them fail. 80%er's are more reliable, but still have to deal with ambient moisture corrosion.

Power vented, or a 90* outside the building, but not horizontal termination.

True For a Shop heater, it wouldn't be worth the extra expense of the 90%+ unless sidewall discharge venting is your only option. Are you running LP? It might be worth the extra, to save LP. I have a couple used Reznor, 75K btu unit heaters for sale $350 ea. They've got electronic ignition, &...

I don't know about all this hate for Toyo's. I'm on my second set on my tow rig, & I've got a couple other sets on my service vehicles. The first set were AT's, as well as my service rigs. Now, running the 285 MT's. The only problem I've had, is the stock Ford wheels having a slow bead leak...

WELL, there's an awful lot of people who do then. It's not posted, & it's wide open.

The moral of the story... Just wheel more often! :awesomework:

I just disassembled a set of Gumbo mudder 38's from 16.5 wheels that they glued the tires to the bead with 3M weather stripping adhesive, & used the tubes for bead locks. The tubes all hold air. So, if anybody needs a set of 38" tubes. Let me know. They worked really well for deep snow wheeling...

Stanadyne keeps everything pretty clean

Spicer 20 rebuild kit Try Ebay! http://www.ebay.com/itm/Rebuild-Kit-Jeep-IHC-Dana-20-Transfer-Case-1946-79-/310926341688?pt=Motors_Car_Truck_Parts_Accessories&hash=item4864a77638&vxp=mtr Have you tried Randy's Ring & Pinion?