lil yota is getting new legs

But can you turn them (steering) :eeek: looks pretty tight to the springs.

Get out the sawzall!




When I ran them on yota axles I had ifs hubs and 1 1/2" spacers and they still hit the springs pretty good. Although I probably spent more time at full lock than you will since I had about 2 feet more wheelbase. :redneck:

yeah they turn, my steering stops are all the way out and they rub a little bit about the depth of outer lugs , i'm throwing on my old ifs hubs with some 1" spacer. And i just ordered a set for the rear to keep them off the frame. So it should be a touch under 81, and then need to cut allot out of the rear fender or whats left of it. The tricky part will be getting it in and out of the garage lol.
There at 15 psi how she sits so hopefully it will come down a bit 5 psi

update on the 42s pics
1 1/2 spacers in the rear 1 1/2 spacers with ifs hubs and Tacoma float rotors turned out pretty good next is to move the front axle forward an inch or two

I think you need to change ur screen name a cruzer on 44s N a runner on 42s doesnt really scream out LIL YOTA!!!:fawkdancesmiley:

Nice job man

How about Beat2Chit!

My vote is for ( lots of broken parts):awesomework::beer:

Those axles look ridiculously tiny now....

Longfields 300m output should take care of that part, 23 spline input should make the case not my weak point anymore.

Nice!

Bling! :bling: What no 30spl front output? Cheap bastard! :redneck:

Who sells the 30 spline

:awesomework: I know Marlin does... Bobby did have an upgrade also...:awesomework:

I got one from Marlin. I talked to Tina when I p/u the rear output and she said they wern't selling the Ft outputs any more.

Comparison for ya 21 vs 23, not a huge difference but definitly noticeable.

Wow that's more noticeable than I thought it would be. Very nice!