Let's see your tow rig!!!

TacomaJD said:

That's a sharp truck! Love the S.S. M-16's, good looking tire for a lifted tow rig.

Click to expand...

Yes. I don't know if you can see the tread but I have 40k on them tires and still a 1/4" of rubber left. Excellent dd tire. Quiet smooth and they last!

92FleXJ said:

Yes. I don't know if you can see the tread but I have 40k on them tires and still a 1/4" of rubber left. Excellent dd tire. Quiet smooth and they last!

Click to expand...

Damn that's awesome! If I ever wear the Federal Couragia M/T's on my truck out, this may be my next tire. I actually scanned them over while deciding before I bought these, but found a cheap wheel/tire combo I couldn't pass up.

Are yours 35/s or 37/s? I figure they are 35/s but they look big in that picture. 35/12.50/20 is the smallest m-16 in a 20" rim. I run 33/12.50/20's on my truck, they rarely scrub when cut all the way, but do occassionally....so I'd def have to a little extra lifting to run 35's.

Re: Re: Re: Let's see your tow rig!!!

TacomaJD said:

Damn that's awesome! If I ever wear the Federal Couragia M/T's on my truck out, this may be my next tire. I actually scanned them over while deciding before I bought these, but found a cheap wheel/tire combo I couldn't pass up.

Are yours 35/s or 37/s? I figure they are 35/s but they look big in that picture. 35/12.50/20 is the smallest m-16 in a 20" rim. I run 33/12.50/20's on my truck, they rarely scrub when cut all the way, but do occassionally....so I'd def have to a little extra lifting to run 35's.

Click to expand...

You have a 7.3 ford or different year? My 08 on on 35's, 20's, and factory height only rubs that black plastic fender at full lock. Not enough for me to trim it.

Sent from my SCH-I535 using Tapatalk 2

2001 Dodge 3500 4x4 24v cummins 5spd

TacomaJD said:

Damn that's awesome! If I ever wear the Federal Couragia M/T's on my truck out, this may be my next tire. I actually scanned them over while deciding before I bought these, but found a cheap wheel/tire combo I couldn't pass up.

Are yours 35/s or 37/s? I figure they are 35/s but they look big in that picture. 35/12.50/20 is the smallest m-16 in a 20" rim. I run 33/12.50/20's on my truck, they rarely scrub when cut all the way, but do occassionally....so I'd def have to a little extra lifting to run 35's.

Click to expand...

There 40/14.50/20
8" lift on truck with full cut outs.
Rockers are 25" from ground when trailer is not attached.

Re: Re: Re: Let's see your tow rig!!!

Mortalis5509 said:

You have a 7.3 ford or different year? My 08 on on 35's, 20's, and factory height only rubs that black plastic fender at full lock. Not enough for me to trim it.

Sent from my SCH-I535 using Tapatalk 2

Click to expand...

Neither, 6.0L gasser GMC 2500HD

92FleXJ said:

There 40/14.50/20
8" lift on truck with full cut outs.
Rockers are 25" from ground when trailer is not attached.

Click to expand...

DAYUM! Didn't realize they were that big, guess the angle of the picture makes it a little hard to distinguish. Sumbitch looks good as hell though!

Drag a 1 ton jeep around with a 1/2 ton truck. Its on 05 and has that all alluminum L33 motor. Ive thought about getting a bigger truck but this one handles it so well and makes such a good DD I cant justify it.


Sometimes the Jeep acts as a tow rig to get broke vehicles off the trail. I can run my winch through a hoop on my stinger and in this case down to the axle of this blazer and lift the whole thing up in the air. In this case he had a flat tire and we ran out of ways to get it filled back up after we emptied both of our tanks and burnt up a compressor. So I just lifted him and we cruised out of Ivy this way. Its bad when the locals in WV think your crazy. I also helped recover a buddy of mine who ripped all link brackets off his rubicon and shoved his axle clear back into the tub. Hooked it up from the front and brought him off a pretty decent hill and through a creek to safety.

This :






Got replaced by this yesterday:

2000 ford f350 cold air 4 inch exhaust dp tunner

Well

Replaced my 09 half ton dd/tow rig for this kept half ton for dd

01 7.3 4" lift 35 nitto on 20's 245k still going

I've got two but two but this is the only pic of my latest one

2012 dodge cummins fuel wheels atzs


Sent from my iPhone using Tapatalk

on the job. off the job


Sent from my iPhone using Tapatalk

My tow pigs

NTIDWELL said:

Replaced my 09 half ton dd/tow rig for this kept half ton for dd

Click to expand...

I want this truck soooo bad but I sure do like having my DD and tow rig paid for

Here is my junk! 07.5 Dodge 3500 6.7, 6 speed, Deletes, H&S Programmer, Southbend Single Disc, Straight Pipe.

Here is my tow rig and currently my DD. It is a '95 7.3l 4x4 conversion.

Re: Re: Let's see your tow rig!!!

2002 F350 4x4



sent from my dumb phone