Option on H2 wheels

[sub[/sub]What's a xset of h2's wheels worth looking at buying two sets, one with a set of 60% tread 35 bfg at"s

Ole boy is asking 800 bit I was thinking more like 500 what ya"all think
Go in to single bead the wheels since I have a waterjet and Tig at my disposal
Goin on my rear engine dirt roit style buggy I like the back spacing too

I have beat the snot out of my beadlocked H2's with zero issues. IMO, 800 is too much. 500 is closer. I paid $80 for a set of chrome H2's not too long ago.

hell, im looking for another set... everybody want like $400 and up...

Here are some pic's pf my locked H2's

can you possibly measure a bolt circle radius on your beadrings hate to pimp out some wheel just to find out the bolts hit the rim when tight

Those are bad ass. Who built them?

im goin to whip out two sets in a month or so if i get those wheels

ill have to file in the waterjet so i can cut some out if anybody is looking for a set

jewylewy said:

can you possibly measure a bolt circle radius on your beadrings hate to pimp out some wheel just to find out the bolts hit the rim when tight

Click to expand...

I would be happy to measure whatever you need. Let me know specificity what you want to know.

Markrobinson said:

Those are bad ass. Who built them?

Click to expand...

Bought them a few years ago from a buddy. He and his buddy made them. The outer rings are ballistic and the inner ring is custom one piece aluminum.

jewylewy said:

im goin to whip out two sets in a month or so if i get those wheels

ill have to file in the waterjet so i can cut some out if anybody is looking for a set

Click to expand...

dude, im in if you get them measured right, :****:

Score

Now I just need material thickness and bolt length .....

Re: Re: Option on H2 wheels

It shows the thickness on that cad u posted,..

From the empty bottle

thats awesome i uploaded from my phone and couldn't see that side of the pic

drich you really want a set, if i get these rims im goin to make two full sets for a total of eight... i can just as easy blast out another set for you

I would think a little longer about just duplicating the Ballistic prints you have. All the H2 beadlocks I have seen have bolt counts in multiples of (7) to catch and avoid the spokes. May want to keep that in mind.

Edit: if you haven't hit up Pirate for some knowledge, I would check that out.

all the mex take off shops here in Houston used to be $25-40 a rim for H2.

damn those prices would be a whole lot sweeter than 100 a rim for sure

yeah i noticed that thier was 21 bolts and that they looked to be larger than 3/8"

i was thinking the same 21 bolt pattern but i would like to know a bolt circle diameter and a bolt size from MR. Hogg

Re: Re: Re: Option on H2 wheels

jewylewy said:

thats awesome i uploaded from my phone and couldn't see that side of the pic

drich you really want a set, if i get these rims im goin to make two full sets for a total of eight... i can just as easy blast out another set for you

Click to expand...

, if u could pm me the cost of just the weld on inners that's kool, ill get the steel outters cut here,.. let me know

From the empty bottle

jordan7118 said:

I would think a little longer about just duplicating the Ballistic prints you have. All the H2 beadlocks I have seen have bolt counts in multiples of (7) to catch and avoid the spokes. May want to keep that in mind.

Edit: if you haven't hit up Pirate for some knowledge, I would check that out.

Click to expand...

I actually think that the ballistic ones are in intervals of seven because the original ballistic h2 beadlock kit had a 3 piece inner ring, which was prone to failure, hence why they no longer make / sell that kit.