Needing H1 centers cut out

As it says lookin for a shop or someone with either a lathe or water jet/plasma table to cut out the 8 lug center on 12 bolt H1 wheels, preferably not to far from Chattanooga max 1 1\2 to 2 hours away anybody got any suggestions or certain person they use/recommend.

??? ??? ???

MudPro metals works would be a good place. They do good work, good price and prompt with product delivery. Hope this helps.

http://www.mudprometalworks.com/wheelcenters1.html

Check with He-Man Machine......Traveler on here

Re:

X2 for Mudpro. If you don't see what you want online he can cut you something else

b.boyd said:

MudPro metals works would be a good place. They do good work, good price and prompt with product delivery. Hope this helps.

http://www.mudprometalworks.com/wheelcenters1.html

Click to expand...

Found center from. http://www.cmperformancemachine.com/Pressed-Centers/ best price ive found on pressed centers but lookin for some one to cut out center of the original 8 lug part out local and I'll check Neal thanks bro

Here's a couple of pics of what I need done

I just did mine with an oxy-acetylene torch by hand?

Threw some nuts over 4 studs, bolted ring on with 4 nuts and used the ring as my guide

I've done em by hand with a torch and also with a plasma cutter, using the outer ring as a guide it turns out fine.

jkh533 said:

I just did mine with an oxy-acetylene torch by hand?

Threw some nuts over 4 studs, bolted ring on with 4 nuts and used the ring as my guide

Click to expand...

Ok that's what I was wondering, I'll see if I can find a torch or plasma and try that didn't think on using inner ring as guide thanks for the info