More Pics from the front of the TJ work

Just went in the back yar and shot these quick. Tell me what you think of the flex.

33" 12.50
4" lift
Skyjacker T-case kit
Choped front
Jeep Bug markerlights

Next comes Tube exo for the front:evil:

Nice.
But unless you want smashed front fenders (like mine) you need to put some bumpstops on that front axle to keep it out of the fender.
T

working on a way to extend the bump stops now. I dropped them down about an inch but still need to go longer. any ideas?

MADDMUDDER said:

working on a way to extend the bump stops now. I dropped them down about an inch but still need to go longer. any ideas?

Click to expand...

2x2 boxtube - cut to fit - weld it in place.

great flex - looking good.

Rock crusher. is your rig sitting on blocks now? What did you get
for tires now? Jeep looks pretty good also.

landbruiser1 said:

Rock crusher. is your rig sitting on blocks now? What did you get
for tires now? Jeep looks pretty good also.

Click to expand...

I took some 31's in trade for the 33's...

and currently I have found a sweet spot at the moment w/ my Jeep.
4.0 5speed 3.07's r&p gearing 4in lift & 31's - - - the jeep is really doing well for where it's at right now! even went out wheeling today. and damn near **** myself i was so skeered on this - hillclimb by my house. *(TS)

the current plan is; Spoa & either a ford 8.8 or a set of Yukons i might be able to get, lock the fawker & throw on my 33's BFG M/T's...
I'am not all about Ultra Build Up on this rig, Daily Driver & capable Weekender.

*(TS) - Top Secret -

=========== sorry for the HyJack;

Hey Rock_Crusher JNK-RNR and I are lookin for some more places to play you said something about a trail from yelm to the mountians I think? Where were you talking about picking that tail opening at?

Anybody have any spare angle bracket they wish to get rid of???:beer:

MADDMUDDER said:

Hey Rock_Crusher JNK-RNR and I are lookin for some more places to play you said something about a trail from yelm to the mountians I think? Where were you talking about picking that tail opening at?

Anybody have any spare angle bracket they wish to get rid of???:beer:

Click to expand...

I went today to that *(TS) area...

If you can get down here tomorrow - I'll show you where it is at
I'll bring my camera & snap a few pic's even. bring your spare undies though!
as for the "Public" wheeling area - I was talking about ELBE ORV

just do a Google search w/ the words Elbe Hills ORV / or / elbe orv

and basicly - avoid the "busywild trail" - until you've rode through it w/ someone in a capable rig of running it. lot's of icky mud up there too!
looks like your rig's got a nice stance to it now! mine just found the power band again w/ 31's... :haha: :haha: :haha:

it was actually pretty fun today wheeling w/ 31's again & AT's at that.

Lookin' good Steve.:redneck:

Thanks Ben:kissmyass:

Got sdome angle bracket today I will post pics of the new sliders and bumper soon. They are gonna be sweet.... Bite me hooked me up with a free 33" 12.50 today much thanks to him now the wife will be off my a$$ for the tire swapp Rock_Crusher and I did. Post pics Soon :flipoff:

MADDMUDDER said:

working on a way to extend the bump stops now. I dropped them down about an inch but still need to go longer. any ideas?

Click to expand...

I used black RTV to "glue" a hockey puck to each of the spring locators on the both of my axles, if you need more than 3/4 of an inch screw two of them together and then glue them on. I would not use more than two but I have seen a guy that screwed five of them together and just put them in the spring and lets them flop about. They can't come out anyway.

That is a crazy idea!! I am gonna try it so just glue it in place? It wont get knocked off in a hard flex? CHEERS:beer:

Hasn't come off yet...just make sure the mating surfaces are really clean and roughed up. I used a small wire brush on my dremel tool to scuff them up both the axle and the puck....

Besides they'll only get pressed on harder and the axle does not move sideways the track bar prevents that.

good point thats a nice lookin heep you got there! :flipoff:

as promised the pics, spent most of the day with ben at the shop. cut bent and welded. Thanks for the help ben:beer:

MADDMUDDER said:

as promised the pics, spent most of the day with ben at the shop. cut bent and welded. Thanks for the help ben:beer:

Click to expand...

:wtf: Woah, that thing looks like a plastic toy in the first pic. :haha:

you must have been looking at a pic of chris's truck:looser:

What are the nubby things on the side there???

MADDMUDDER said:

you must have been looking at a pic of chris's truck:looser:

Click to expand...

I think he was talking about the first pic with your "boner" in it.....make a crack about my junk again and I will park a tire on your hood.