• Help Support Hardline Crawlers :

Search results for query: *

  1. B

    95 tbi 454 chevy

    I've checked the grounds and rechecked I have adjusted tye valves 3 different times because they clatter on cold starts for like 5-10 seconds I changed the non adjustable rocker assembly to an adjustable style and they clatter on cold starts
  2. B

    95 tbi 454 chevy

    Nope tps is fine and checked the firing order over and over.
  3. B

    95 tbi 454 chevy

    Ya did all that . Checked fuel pressure and it was good . This ones got me stumped bad .
  4. B

    95 tbi 454 chevy

    Maybe someone has seen this problem before . I just installed a brand new 454 and it has a miss and no power . All new plugs wires cap and rotor . It is not throwing any codes . Watching the fuel injectors after half throttle stop sending fuel. Had it hooked up to a scanner while I drove...
  5. B

    Are you still interested in the t cases? Sorry it took me so long to get back to you. It is...

    Are you still interested in the t cases? Sorry it took me so long to get back to you. It is advanced adapters doubler kit and they use to have one bearing supporting the carry through shaft but now they are dual bearings thats the difference. The cases are stock gearing. I do not have...
    • blaz4x4
    • Profile post
  6. B

    moving

    A buddy of mine is moving to Post Falls Idaho area. He was wandering if their are any good places to wheel over there? Anyone ever wheeled that area ?
  7. B

    Reiter survey

    done
  8. B

    Width Restrictions

    I agree with that!
  9. B

    Width Restrictions

    I am just trying to say know your rig know your limitations. Nothing wrong with working through a tough trail, part of the fun. I have had my share of tough trails but I have never left anything damaged (trees) or trail rutted any worse that any other narower rig. I just do not want to be...
  10. B

    Width Restrictions

    I have been wheelin for the last 6 years now. Not as long some. I have wheeled a fullsize k5 and now a toyota with full width axels. My truck is 80" tire to tire. For some of you to say that because I am not a jeep or a toy ( just because of my width) that I should be limited to the trailes...
  11. B

    Which dual case adapter is best?

    martlin crawler . it is holding up to my v8
  12. B

    tbi ?

    has anyone done a toy v8 conversion before here? If so What size radiator did you use and how did you get it to fit?
  13. B

    tbi ?

    A flex fan. Can not run a clutch fan no room flex fan is 1" from rad now. can not get a electric on the front side no room between rad and grill. I might have toremove the whole front of the truck and redesign it to fit the blazer radiator, I just did not want to. I have cooled a v8 with...
  14. B

    tbi ?

    This is in a toy. I have a aluminum 2 row radiador 26" wide 19" tall. a 15" fan. 180 thermostat high flow pump.
  15. B

    tbi ?

    Still overheats. thinking it may be running to lean. 1987 tbi 350. When I was wiring the system up there was in the wiring diagram a hot fuel module with a wire from the fuse box labled idle/gage and a 20 amp fuse. I could not find the wires for this on the engine harnes. the engine is...
  16. B

    cooling problems

    thanks everyone. I hope one of these will make the difference
  17. B

    cooling problems

    I have a fan from a tortus. do not have enough room for it. maybe a fan that does not flex?
  18. B

    cooling problems

    I have finished my toyota project but am having one last problem. I have a 1980 toyota with tbi 350 with a th350 trans and dual toy t- cases. the radiator I have is a howe two row. core size is 23" wide and 19 " tall. It will not get hot right away but the longer it runs the hotter it gets...
  19. B

    need advice

    I had allready found that one. It is only a one core was afraid it would not keep it cool enough.
  20. B

    need advice

    Building a 1980 to with tbi 350. Cannot find a radiator that will fit. I have one that is 2 inches to tall and I was told by some race guys there is a guy in monroe that can alter aluminum radiators to fit racecars but I cannot find him. Does anyone know how to get in touch with this guy or...

Latest posts

Top