Search results for query: *

70 gears into a 61 Thats "Carl Jantz" and yes my kits fit D70 gears into 60 or 61s. And for the 61 if you use the thick 70 gear sets with a 4.56 & up Dana 70 carrier you won't even need the spacer.

coupler Dang well I guess that put me out of work:booo:

Off camber upside Down V turn to get around Goalpost. Finally Mason got this to upload http://www.youtube.com/watch?v=eU556hZjF6U This is going left (NE) from where Louie way gap trail hits the divide ridge trail towards Jump Off Joe. We made it to within 1000 ft of the Jump off Joe Look out...

Good vid Thanks Snowbattman. This is a compilation from his week at Naches and Rimrock. http://www.youtube.com/watch?v=bMRy3LEHcrU&feature=sub

vids http://www.youtube.com/watch?v=Jzie48PHEJ8&feature=recentu we had 4 cameras going, need to do some mixing and editing of course but here is some raw footage. http://www.youtube.com/watch?v=_RFPmwm_qg0&feature=recentu

yes Please make this your sworn duty and I will be forever in dept to you!

Scouting Yes we did. Sat, Louie way gap to Jump Off Joe, nearly. Sunday, Up Narrow Neck to blue lake, to Buckhorn gap, on divide ridge, then back to blue lake to Donicker pass to short & dirty and down. Monday, Jump off Joe hiked less than 1000 ft to where we left off on Louie way gap. Very...

phone I tried PM you but your inbox is full. I got you number from Pratt but it doesn't seem to work, maybe I copied it down wrong, got some questions for you could ya call me at 425-327-0804

Legend So you heard those stories too. I heard it from Wally Larson, God rest his Soul.

local parts store numbers Most parts store guys don't know where to look in there books so here is a chart of what I made that's locally available. they are usually cheaper than having custom ones made but the selection doesn't always meet our needs. DIAMETER I.D. LENGTH NAPA...

Going to divide ridge this weekend, and Rimrock area. I've been over most of the trails in the last 20 years but am looking to cover some ground I haven't been on before. Depending on what map you look at there shows a trail from Louie way gap to the far side side of Jump off Joe. Some maps show...

Fitting after market housing I've looked at several pics of the rock jock and see no reason why it couldn't be done. There seams to be about 1/4" clearance all the way round the ring gear, and all I need is 3/8". I'm sure it will take a bit more grinding but on the other hand their housings are...

Clearancing Here is a shot of just how little you have to take out of the housing to get the gears to fit.

gears for hp 70 We chased the BOM numbers looking for part numbers on the HP 70 gears, yes you can get 5.13s but the 4.88s are actually Super 60 gears unless you have other info. I've even seen super 60s in a high pinion70.

set brgs Yes you would use your Dana 60 set up bearings. and you can reuse your Dana 60 pinion tail bearings. Then for carriers you can use either a high speed or a low speed D70 carrier. the way the offsets are between the 60 and the 70 it turns out that a low speed carrier is two close for...

kit contents All of the above is true to get the job done, here is the standard Jana76 kit

diff My diffs are D60 low pinion front and rear with D70 5.86s. I have a hp 60 right now that I'm setting up with 70 hp 5.13s

J76 with ARB I cracked several 7.17s and 5.86s in the d60 before coming up with this. so You got some cracked 6.17s this should fix it for ya.