Search results for query: *

Any 190 or 255 pump works fine as long as it can do 58 psi. We usually plug the return and run a corvette filter setup with a single line to them. Summit filter kits are nice and include the safety fittings setup for -6 hose btw...

Kinda, we tape the ends with coroplast tape for a professional finish. Its the same stuff painless sells for more $$ on summit. Techflex is the mnfg. Ebay sellers have it the cheapest, same product holley efi harnesses are loomed with but they use basic electric tape to finish, we try not to use...

Speartech is good. We have pretty much stopped using oem ecu's. The holley stuff just works too well and datalogs, plus its universal to any engine combo.. Split loom isnt allowed in my shop along with t taps l, lol We use techflex f6

The hydrobooster will freeflow until the pedal is pressed. Make sure you have freeplay and not slightly preloaded. It should be the first thing behind the pump as per the diagram. You could have a closed center orbital, in that case, throw it in the trash and order an open center type orbital...

Hey guys, I wish I could sell the unit cups for less too but i cant. I would lose $$ on them. Start with a 7x7x3" solid chunk of steel and whittle almost all of it away. It takes alot of time and makes alot of chips. Time is money, period. A forging would be cheaper per part but over 30k in die...

That's nifty.. did you spot the axle vent bladder kit?

Yep, we were using ford ball joints at $140pr., we now use Spicer HD ball joints. $125pr. So figure $565 for a complete kit shipped or $815 for the same kit with Spicer ball joints.

wut? maybe you were misquoted? our kit is $500 exchange plus shipping, east coast ship runs about $65 each way.. includes both knuckles, hardware and arms. :dunno:

we also now have tie rod adapter bushings for our 05-up knuckles, they allow you to drop in a 4140 bushing into the stock odd ball passenger side tie rod hole to sleeve it back to 3/4" and also have 5/8" i.d. for those wanting to retain the stock linkage from knuckle to knuckle. $20 each, need 2...

we now offer a hi offset steering arm for our 99-04 kits that allows an additional 1.5" of clearance. adds $40 to standard kit price we also offer spicer ball joints with any of our kits for $125/side installed.

the best kit available and in stock for quick turnaround

plenty in stock! upgrade that axle today

weaver fab would like to introduce our 2005-up hi-steer kits for ford dana 60 axles. 1" thick steel arms triple doweled and keyed to knuckle (carbon steel dowels) ability to retain vacuum hublocks if needed 5 bolt attachment clears 5.25" backspacing wheels! retains stock linkage points tested to...

the original and best steering kits for your rig, kits in stock. updated information added to my sig, see our website at weaverfabrication.com

rig turned out great! flashemifyougotem thanks for thinking of us for your steering needs too!

get hooked up with hi-steer for the 99-04' ford superduty DANA 60 , we sell single and dual side kits, these are super beef and available now, here is a link from another site with pics, thanx cj http://www.pirate4x4.com/forum/showthread.php?t=890475 if i can help out your build, lemme know

oops, put this in the wrong spot, can delete if needed..

hey guys, i sell hi-steer kits for the 99-04 dana 60 superduty axles, i have an ad with pictures on another site, here is a link: http://www.pirate4x4.com/forum/showthread.php?t=890475 ifi can help out your build, lemme know, thanx cj

hey guys, new to the site, lurked for a while, been fabbin, wheeling and welding for years. i have a my current ranger build over on pirate, basically a 90 ranger, 76/10.5 sterling, blown 302, e4od, bobbed alot, exo, atlas, 42 rockers, c/overs, etc.. almost done with it, really enjoy this site...