Search results for query: *

I will be doing hydro assist on my chevy and I was looking at the end cap that is ported and then drilling and taping the top cover. or is porting the box its self better??

lol they will also stay running when the alt goes out. But most likely a fuel filter.I work on and drive these trucks there really simple.theres 1 filter and a water/sedment filter, the water sedment is useally on the left frame rail it has a screen in it you cant see. I have had that screen...

I did pull the cover and the locker looks great. I didnt see any wear on the locker teath. the axle has had water in it so there is rust in there but the locker has none on it.

I do have a spartian in a front 60. its been in there 3 years, lots of trips to the dunes, trail ran, I had the cover off a few weeks ago and saw no wear. I have a full bodied 83 1ton chevy 4.56 gears sm465,208(? not a 205)with a 6.2 diesel,44/18 boggers. now that being said I did just break a...

it helps but its not a fix all.

I had 1 bad battery and it would drain the good one in about 3 hours. I ended up finding it by charging both of them up and then disconnecting both and letting them sit over night and using a battery tester.I had to replace a 6 month old battery that went bad. I also did the unhook them check...

check the one way valve. in backwards or mabe some thing in it??

yup this is true as I discovered. so I might not wheel this weekend. but I will pick up the axles. how bout if I switch spiders and both axle shafts ??? I do have another 90axle that is compleate.

yup mine has a 10 bolt front and semi float 14 rear with the gov locker. hopefully the last trip for them cuse Im getting a 60/ff 14 with a detroit.

Forgot to say front ya the front. it was late and I was typing faster than thinking. did they make a 3/4 ton 10 bolt rear???

Cool thanks. ya there both 10 bolts. the 83 is a 3/4ton and the 90 is a 1/2 ton. what I was told was a 10 bolt axle was the same for both.

will a 90 suburban 1/2 ton 10 bolt axle shaft work in my 83 3/4 pu???

Brakes wired so it only gets 6 volts to each wheel

not to hijack to much but I have a spicer 23 divorce mount I was told came out of a chevy. any one know anything about them??

tread and side wall is a little stiffer if you look at the # ratings on the D to the E its only about 200-800# diffrence in load cap. just air down more.

I have seen the early ones with 2 wheels welded together for the dualls. they where 14" wheels

I am chasing a oil leak on a 22r. how does one tell if the cover is cracked by over tighting the top bolt?? you are talking about the one under the cam bolt

I could use a rollbar,hood and a LTfront fender if you have stuff you are getting rid of

Seriously though, I'd like to see your rototiller. Can you dress it up in a naughty outfit and slut it around the back yard...? how bout if I ride my weed eater like a stick horse and paint it yellow?? (do I have to be nakid??mabe a new one for truth or daire??