Search results for query: *

I tried but could not find any in my ratio. I would even take used spicer over anything. Spicer has the setup numbers etched into them. I hit the perfect pattern the first try by using the numbers and a chart i found in an old book. To this day that was the most picture perfect pattern ive ever...

Ordered new G2's hopefully they will last. They at least have a ten year warranty

Great job. I always love seeing your work.

G2 gears are also made in third world countrys.

Ok ive noticed a trend here.... pile of broken yukons. I now have some broken yukons. They were set up as good as the gears would allow. How does one tooth break on a dana sixty? There are always at least two teeth in contact at all times. I know at least ten people who have experienced the...

So as things evolve, the one piece belly pan became a pain. So i cut it into three pieces and added a front oil pan portion. The first front portion kept getting bent/smashed up enough to still smash the oil pan sump. So this time i made it out of the same T1 wear plate material as the rest of...

:cheer: kinda fun huh...

Ride height totally adjustable....can i have your old coil overs?:D

For snow you want the wheels to turn without having to holeshot it....read up and make your decision. Do the math. Let us know what you decide and mostly the results of what you pick. Hope the info here helps

4.3 V6 cpi th350 203/205 39" stickeys 5:38s i got a 10" which made a crossmember link mount clearance issue much better.

well i could not be happier. drove it up the road 2500 feet in elevation, trans temp got to 180 and stayed. wheeled all day. no issues at all. mind you it was only 50 degrees outside so lots of cool crisp air flowing across the huge RV cooler. we will have to wait till summer for the real test...

So the 2800 rpm stall is installed. drove it around on the street and in my yard. i love it. best 200 dollar mod ive made. it does not drive thru the brakes and the actual stall is about 2000 to 2100.:cheer: it seems my transfer cases shift into and out of gears much easier without the slight...

ok so i talked wit huges performance and a few other tech guys. hers what i learned: advertised stall is a range based on a big block power curve. the stalll will be less on a small block by about 700 rpm the stall will be even less on a stock v6 you are supposed to guess the required stall...

Latest update: I ran a stock stall converter 1700-1900 range. Tended to drive thru brakes, actually caused a roll in a comp. Gonna swap to a 2600 - 2800 stall.

Having similar issues with very similar setup So did this fix your issues? I am having same issues with almost identical setup?

Ok made a new fitting out of stainless, last one was brass. Its now tight. Everything works in the yard on my obstacle. Went to a local comp and sure enough it started failing. After extensive testing i removed the last ARB part, the solenoid appears to fail intermittedly. So now its comp on...

so after line change everything works but there is now a leak inside. i got the bulkhead fitting cross threaded and it leaks there. i made some special stuff to eliminate all the cheesy ARB stuff cause at that time i had full machine shop to make ****. so off to have a new fitting...

no but that is on the agenda for today, gauge and a new line.

air is supplied by a york using the ARB switch. system is 100 psi. disassembld the ARB and there is nothing wrong/broken. i did find a area of the line that was smashed but does not leak and gets plenty of air flow.....gonna replace that and see. its not the plastic its steel braided nylon...

RD166 dana 60 LP air system is tight holds air overnight. Lines dont leak and are not plugged. when wheels are in the air it works perfect, passes ARB's bench test for in vehicle. appeas to engage and diss engage. disassembled it and no stripped splines on the axel and no broken axels. Get...