Search results for query: *

I cant remember the brand, it came off of my EngersollRand A/C. You can get something like it from harbor freight i'm sure. As far as the quality goes I dont know.

I currently run a WARN 9500 High Speed on my 1st Gen and its impressive for its size and weight. That said, I'm moving it to the rear and mounting my new 8274-50 on the front. Besides the reliability, the line capacity is awesome on the 8274. I burried my truck this winter in the mountains and...

I run mine with a 10 gallon tank between the frame rails where the spare used to be. It has a pressure switch set at 90 psi, pop off valve set at 125psi. I used a pre lube on the inlet side ATF with a filter. The tank has a drain and Air chuck installed, the primary air chuck is located in the...

Winch I just had this same problem on my WARN 9500HS. Pulled it apart, did all the standard tests and had the exact same problem as mentioned above. What it finally came down to was that the surface area between the motor housing and the part that holds the brushes did not make a ground when...

Motor The motor came out of a 91 toyota 4wd truck. As far as the pan goes. I was told from the previous owner that he had to swap pans and the pick up tube because the donor motor was from a 2wd truck. This now explains why the pan was loose when you guys picked it up. I currently dont have any...

I never install a Chevy motor with the Dizzy installed. For several reasons but its mainly personal pref. 1) It's one of the fastest ways to break the dizzy if it happens to catch on the firewall during install. 2) I always prime the motor to build oil pressure before I fire it off for the first...

If it runs fine with the HEI, I'd run that. You answered your own question. Keep it simple and repairable with off the shelf parts. Now if it was going into a hot rod, go for it.

Excellent point.:awesomework: You know your carbs well.:cool: I am very surprised at how many people dont know the old backfire trick. That trick works wonders, but I usually find that the jet or jets eventually need pulled and inspected. Only because it never really gets rid of the crap that...

:haha: :haha: :haha: :haha: :haha: :haha: :haha: :haha: :haha: :haha: So Damn True.

Carb Not really sure on the time. Ill call ya tomorrow and give a heads up. I kinda figured it was a vacume leak of some sort by what you were saying. What motor do you have in the yoda? I believe I have extra spacers and I may have a few gaskets as well. I cant recall if I let them go with the...

Carb I will be up in your area tomorrow. I could take a look and let you know what may be the problem. You can PM me your number if you wish to have an extra hand at it. Rgds, Dennis

Runner Damn you boyz work quick. Looks sweet! Call if you still need some help. Here is what it used to look like.

203 to 205 Check out ORD (OffRoad Designs) http://www.offroaddesign.com/

Solenoids You can use the automotive starter solenoids but you should get the heavy duty one's. Also be sure to get the solenoids with the poles located like you need them or you will find yourself making new leads to connect them together. I have done this and have had no issues regarding...

National I'm sorry to hear that you had a bad experience with National. I'll stop by there and talk to Paul (The Owner) about it. I never deal to much with the hired help around there and would be pissed myself if I were treated like that. I'm actually pissed that they treated you like that. I...

Tire Groover http://www.vanalstinemfg.com/index.html Not a cheap unit. But kicks serious ass. It will groove as fast as you can push it.

Machine Shop Take it to National Machine off of Lilly Rd. Between Pacific Ave and Martin Way. Right behind the fast fuel place. Ask for Paul he's the owner. Tell him what you need done. He'll take care of you. Ive been with them from day one, they have built over 10 motors for me. From...

Brand Name 3M makes this style tape that is usually sold at Lowes or Home Depot. 3m Calls it SAFETY WALK TAPE. They make it in medium and heavy abrasive. Be sure and get the heavy abrasive. Usually when you are asking for it they will call it anti-slip tape. Hope this helps.

Electrical Problems I used to own a 91 xj and had the same problem. I found the problem to be the wires running to the ignition switch. Its been some time but I recall that there was a main wire that ran all the things you mentioned. Mine had a break in it. The only other things I can think of...

Very True. I have found that its mainly from the Deep Cycle's recovery time (YELLOW, BLUE, ORANGE). If you are hard winching continiously you will eventually reach a point that the battery will not recover quick enough but if given adequate time to charge it will recover. Its a double edge...