Search results for query: *

<iframe width="560" height="315" src="" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

I can say I have been really happy with it..

When parking lot turning what happens when ya tap the brake pedal?

Injection pump.

The hoses do go bad after time on those--done a couple and a couple lift pumps that leaked. You starting issue is more than likely an injection pump timing issue or just a pump on its way out.

No--no way you can damage a turbo like that unless it was already damaged so to speak.

Its very possible. Even 1" can have a drastic chance in circumference. I can see going smaller on something like an alt but for the crank that seems ass backwards for a wheeler,

I used to run redline when it was in the toy--I will give that a shot--thanks for the input

I am thinking if it was in my old toy it would be hardly noticeable but damn near sitting on my t-case I suspect thats making it easier to hear.

Just standard 80-90w. And it just might be normal but I can hear it without having to listen for it. But I am also damn near sitting on the t-case.

So just how loud should these gears be? Most noticeable in 3rd about 15ish mph.

And they screw right to the speaker box and I added foam to the inside of the covers on the outer edge and the foam sis against the amp so they don't make any noise. I also got some 90 degree rca adapters so they fit under the covers. First trip out and didn't even notice them.

So started playing with some aluminum and my sheet metal brake. Here is what I came up with and once I built one I was able to make a mirror image of it for the other amp.

So I really contemplated when I built the rig on making covers over the amps since the buttons/knobs will be facing upward and get water/dirt in them. I found nothing really happened out on the trail but towing water was getting on the amps.

Few pics out at reiter having fun...

So every year we do our annual hangover/snow run. Well I wanted to try and see what I could so about doing a windshield. So since it was kind of an experiment I went down to the hardware store and got as piece of that cheap plexyglass. So after a bunch of templates I came up with a pretty slick...

Done yet :redneck:

I am pretty sure thats upside down in the second photo because its together correctly. There is only one hole in the H and only goes on one way... plus I staked each piece..

TG 4".... I went 23 degrees but 25 should be ok unless they have a TON of arch..

Ya should buzz it over and run it up my ramp and lets see if anything falls off,lol.