Search results for query: *

Oh, a bit of advice, do not mount a smitty winch feet forward. My previous bumper i had mounted feet forward thinking it would be advantageous, when i took winch apart to grease it i found mud and rust caked in near the designed drains, when mounted feet down it will drain properly.

Front bumper redone, lost 35ish pounds, sunk it back 2 inches and bottom is 2 inches higher. Will be adding shackle mounts to front next weekend.

Have done a few more modifications in the past year. Now it has an 8.8(69 dollars on halfprice day :D )with 4.10 gears and limited slip. Welded on an Artec truss. Used a 1310 yoke ordered from ECGS, was able to use stock rear driveshaft still. Removed abs system after axle swap. Changed...

Changed out the stock rims for 4.5" backspace 15x7's was rubbing too much with stockers even with the pizza cutters

So I've taken it on two trips to elbe it does well, I'm loving the v8 for instant wheelspeed when needed. I let a friend drive it for a bit on last trip(he's new to offroading), he managed to only bust out a tail light lol. Then I let his 14yr old son drive it and he managed to get it stuck on...

Finally got bumper finished, got a 9.5smitty on an early black Friday for 250 to my door couldn't pass it up. Winch is mounted feet forward, flipped, with the gearbox rotated to access the freespool lever

Got a front locker from Lokka, gotta keep this Cherokee cheap lol. Got it installed before the rain hit. Now working on wiring rock lights, hids, air compressor, and ham radio.

Replacing info center module thing that only tells me when a door is open Oh and photobucket has gone to complete crap with pop-up ads....

Got 4 bilsteins for a hundred bucks got 2" travel back

Sliders done, little different than most Cherokees that use square, used the round because it was free

Almost done with sliders, went a little different than most Cherokees, used the free 2" round tube. Will post some pics tomorrow. Now I'm debating myself over winch choices. Warn 8274 or a standard lower profile winch. The winch will be mounted feet forward whichever one I get, question is...

Dent removal the easy way :redneck:

Yes still has low pinion front, that's on the list of future upgrades, along with 8.8 or d44 rear

I gotta say the np249 is one of worst tcases I've ever seen. It was bad enough that it has a coupler, then when disassembling to remind the input gear found the one piece tailhousing and annoying ring.... Anyways picked a np242 up on Saturday, and swapped out the 249, took all day because the...

Current ride height

Droop

Full stuff

:awesomework: The 33" s fit, slight rub when full flexed on inner fender near coil and on lower link and swaybar. Going to install 1.75" spacers on coils and call it good. Oh and these tires have the deepest tread I've ever seen, 27/32nds. Pics coming

Free tubing is the best kind right? The scrap metal guy for my work was switching bins, the bin he was bringing had pieces of tubing sticking out of it. Asked him what was the deal with the tubing, he said the last stop just kind of threw it in and it wasn't on the books and I could take it so...