Sold/Expired 05+ super duty axles Griffin G.A. new price! $500 each firm!! $900 a set!!!

[Huntingman2706217]

dana 60 fronts with 3.73 or 4.10... 4.10 may or may not be same price... thats not me... all NORMALLY come with steering, track bar, sway bar, and even the radius arms... none of the axles have calipers or pads but do have rotors...

Axles have 1.5in thick shafts... 35 spline inners and outers... lock out massive hubs... 1/2in thick tubes... 3.75 diameter tube...
$500 each

I can also get the sterling 10.50 axles from the same trucks if your interested... with the luck ive had with shady people i have to require half down up front via paypal... other half upon pickup this way we are both covered...

more than likely LSD... 1/2 thick tube... massive disc brakes... 35 spline shafts and carrier... 3.75 diameter

$500

sell both as a set for $900

i will meet 1 hour away for a set purchase... i have a engine hoist which is a little easier...

6785886661 is my number call or txt any time!

Pics are of the same type axle and shape these have been long ago sold... axles on hand do not differ by much but can provide to serious buyers...

pics of the other axles are mine i built for my MJ with Artec Industries equipment just to give you an idea on what can be done...

Artec also now makes a truss system to bolt the 60 into a JK and they should have their TJ XJ MJ ZJ model done this winter...

 

[mdo817]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

Damn Travis, that is a load


Sent from my iPad using Tapatalk

 

[RangerSVT]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

The one you have for parts, would you sell the driver side shaft, unit bearing, lockout and coil spring pad/mount?

SVT

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

Damn Travis, that is a load


Sent from my iPad using Tapatalk

I know it! to think i went to pick up with the small trailer first... lol...

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

The one you have for parts, would you sell the driver side shaft, unit bearing, lockout and coil spring pad/mount?

SVT

sorry the one for parts is for me... i have one of these already under my MJ and plan to keep one for spare everythings... i can get another so id sell all 3...

do like me and buy one of these for spare parts! prices are OBO...

 

[nwflyj]

Re:

If you do bust one up I would be interested in radius arms, tie rods, panhard bar , sway bar w/hardware and drag link.

 

[RangerSVT]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

sorry the one for parts is for me... i have one of these already under my MJ and plan to keep one for spare everythings... i can get another so id sell all 3...

do like me and buy one of these for spare parts! prices are OBO...

Thats my problem. I bought the one I have now as parts and I'm trying to make it a complete axle to put under my OBS....

SVT

 

[Huntingman2706217]

Re:

If you do bust one up I would be interested in radius arms, tie rods, panhard bar , sway bar w/hardware and drag link.

that stuff i may would sell... i dont think anyone is gonna want any of it really... i didnt use any of it for mine... the one axle i plan to keep i would sell all of it off of... only thing is the one i planned to keep is the kinda rusty looking one... i dont care about the housing to that doesnt matter to me... but i think it has everything you want minus the arms...

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

Thats my problem. I bought the one I have now as parts and I'm trying to make it a complete axle to put under my OBS....

SVT

if i ditch all that other stuff to the fella above i will sell you the one coil spring mount point... nobody will want them either... but i cant sell the guts from a good axle man... and honestly its gonna be hard for you to find someone that does... even junkyards these days will only sell the whole axle unless its damaged... message me with a offer on the whole axle man... use yours as parts or whatever... im flexible on price... also can take trades...

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

come gettem!

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. split or pair *warranty*

make me a offer... chances are i wont turn it down...

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. new price! $500 firm!!

changed price to $500 firm! need my trailer... lol

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. new price! $500 firm!!

one axle left!!

 

[Huntingman2706217]

Re: 05+ super duty axles Griffin G.A. new price! $500 firm!!

now have 2 dana 60's ready to go... sitting here at my house from people that swore they wanted one then never showed up... go figure... lol

 

[Huntingman2706217]

mine AFTER being built... these of course do not come this way...

 

[reeseracer jk]

Do you have any left? Sorry I just looked it up a friend said it was 4 hours from Lexington Ky area I just looke your over 6 and half hours cost me to much in fuel to buy one for that sorry.

 

[1tonxj]

So much want drool maybe in a couple weeks I'll be able to buy one

 

[not4show]

You wouldn't happen to have any F350 front leaf springs, would you?

 

[Huntingman2706217]

Do you have any left? Sorry I just looked it up a friend said it was 4 hours from Lexington Ky area I just looke your over 6 and half hours cost me to much in fuel to buy one for that sorry.

I can travel up to one hour away to meet if that helps... would mean i could meet you on the north side of Atl... would save you about 2 hours round trip or so... find ya a little pickup or maybe shipping through fastenall would make it worth it... one guy quoted two axles to AZ and was only $250 through them... i can drop off at the one located in Griffin GA if you want to get a price quote from them... about 500lbs an axle... 76in wide including studs and all... about 18inx18in

 

[Huntingman2706217]

So much want drool maybe in a couple weeks I'll be able to buy one

you know you want one... i can always do half paypal to hold one and half at pickup... basically "taking payments" i guess lol... people seem to love that these days...