I 100% dont have to sell this rig but i honestly don't have time to go wheeling near as often as i would like to anymore. Combined families and a career make it extremely difficult. My new girlfriend was in the truck on her very first ride and it rolled and she is way gunshy about wheeling now. So i guess i'm going to try and rehome my ride to a new owner. I'm sure i'll forget some stuff but i'll try and get it all.
started life as an 87 toyota 4runner
Vortec 4.3
700r4 with $700 adapter to run 23 spline toy turbo case
23 spline crawl box
23 spline turbo tcase
front range offroad tcase hanger
using part of a budbuilt for a skid
PSC power steering pump
PSC power steering reservoir
GM Dana 60 kingpin
stock inner shafts
spicer joints
chromo 35 spline outers
Solid Industries drive flanges
5.13 gears
welded carrier
beefy diff cover with hydro ram mount built in
long travel driveshaft with heavy wall tubing. Will support vehicle on shaft.
rears up front for leaf springs
Corp 14 Bolt
5.13 welded
barnes cover i believe. been a while but its shaved.
pinion gaurd
heavy wall driveshaft on rear
chevy 63" leaf springs
4xinnovations cage with added tube
tube dash with windshield bar attached
harness bar behind seats
seats are mounted into cage
Beard Suspension seats
PRP harness on driver side
RCI on pass. but have matching PRP in box for passenger
cheap 4 points on back seat
10 gallon fuel cell
Warn 9k winch
4 40x13.5x17 Goodyear kevlar MT/R on Hummer H2 wheels
1 40x13.5x17 oldschool MT/R on steelie
Truck is located in Dalton Georgia. Its near Chattanooga TN or NC boarder.
Asking $8500 or possible trades for bikes, cars, trucks anything that catches my eye.
I do have the title for this truck.
7069346922
started life as an 87 toyota 4runner
Vortec 4.3
700r4 with $700 adapter to run 23 spline toy turbo case
23 spline crawl box
23 spline turbo tcase
front range offroad tcase hanger
using part of a budbuilt for a skid
PSC power steering pump
PSC power steering reservoir
GM Dana 60 kingpin
stock inner shafts
spicer joints
chromo 35 spline outers
Solid Industries drive flanges
5.13 gears
welded carrier
beefy diff cover with hydro ram mount built in
long travel driveshaft with heavy wall tubing. Will support vehicle on shaft.
rears up front for leaf springs
Corp 14 Bolt
5.13 welded
barnes cover i believe. been a while but its shaved.
pinion gaurd
heavy wall driveshaft on rear
chevy 63" leaf springs
4xinnovations cage with added tube
tube dash with windshield bar attached
harness bar behind seats
seats are mounted into cage
Beard Suspension seats
PRP harness on driver side
RCI on pass. but have matching PRP in box for passenger
cheap 4 points on back seat
10 gallon fuel cell
Warn 9k winch
4 40x13.5x17 Goodyear kevlar MT/R on Hummer H2 wheels
1 40x13.5x17 oldschool MT/R on steelie
Truck is located in Dalton Georgia. Its near Chattanooga TN or NC boarder.
Asking $8500 or possible trades for bikes, cars, trucks anything that catches my eye.
I do have the title for this truck.
7069346922
