BMan
Well-Known Member
- Joined
- May 5, 2009
- Messages
- 530
Here is what it has:
- 4.56 gears
- Detroit Locker
- FF
- Partially shaved (within 1/8 of bottom bolt)
- New Yukon bearings (not put on yet).
- Set of freshly turned rotors
- Mocked up tube diff cover (needs finished)
- perches still on it (have replacement ruffstuff set I'll include if needed)
Currently axle shafts are out, hubs are off and rotors were just turned but not mounted to hubs. As it sits now and I'll throw in a set of ruffstuff perches if doing leaf springs and the rollers in the pic below for $425. I will be at Mountainside ORV on Labor Day and can bring it with me.
Pics were before rotors were turned and pulled apart. Axle show upside down to show shaved parts.
[attachment deleted by admin]
- 4.56 gears
- Detroit Locker
- FF
- Partially shaved (within 1/8 of bottom bolt)
- New Yukon bearings (not put on yet).
- Set of freshly turned rotors
- Mocked up tube diff cover (needs finished)
- perches still on it (have replacement ruffstuff set I'll include if needed)
Currently axle shafts are out, hubs are off and rotors were just turned but not mounted to hubs. As it sits now and I'll throw in a set of ruffstuff perches if doing leaf springs and the rollers in the pic below for $425. I will be at Mountainside ORV on Labor Day and can bring it with me.
Pics were before rotors were turned and pulled apart. Axle show upside down to show shaved parts.
[attachment deleted by admin]
