I've got a YJ I'm looking to sell. It's been completely gone through except a couple minor things.
I don't have time for two rigs. I've got a boat load of money and time in it, but just want it out of the way. I had been working on this thing off and on for a while, now it just sits in the shop taking up much needed space. I wanted something to trail ride in or take it out and just ride back roads. (wife loves doing that.) Now that we have the RZR, we can roam all over the place around the house.
It has a SBC 350 with a SM465 (granny low 4 speed) and 205 t-case. Has 1/2 ton axles from an 85 Chevy truck spring over.
Axles have been completely gone through with new Yukon 5.38 gears,bearings,seals,Warn Premium lock outs. (open carriers)
New water pump, alternator, power steering pump, fan, belts, hoses, mild cam, valves, oil pan, distributor, plugs, wires, Edelbrock 1406 carb, intake, Blue torch flat fenders, battery, bumpers, clutch slave cylinder, 2 Bilstien 5150s on the front . The engine looked good when I pulled the heads, so no machine work was done.
Fresh paint (black cherry pearl, half gallon left over) looks about 3 different colors depending on light, fresh painted black 15x12 bullet hole wheels. (all paint is good enamel, hard as a rock.)
Extra roll cage, one my buddy took out of his, much better than stock.
What it needs:
your choice of tires. (I'll provide a set of rollers.)
brakes. (Just need bled.)
power steering pump bolted up and plumbed.
Interior cleaned up and bed lined or painted.
A spot on the driver door area fixed and painted again.
Hard half doors painted. (I have plenty of paint that'll go with it.)
Does not come with a top. The one on it was rotten and got tossed. I keep it in my shop.
Put a little time in it, a set of tires and you'll have a nearly new Jeep. The hard parts are done.
In the pics it has 39.5s on it. It has a 3" body lift that could be taken off and 35s would look good on it.
Link to more pics: http://s167.photobucket.com/albums/u128/Outfitter13/Jeep/
I can get more pics if interested just tell me what you'd like to see.
$3,000 Have ***le in hand. Need it gone.
I don't have time for two rigs. I've got a boat load of money and time in it, but just want it out of the way. I had been working on this thing off and on for a while, now it just sits in the shop taking up much needed space. I wanted something to trail ride in or take it out and just ride back roads. (wife loves doing that.) Now that we have the RZR, we can roam all over the place around the house.
It has a SBC 350 with a SM465 (granny low 4 speed) and 205 t-case. Has 1/2 ton axles from an 85 Chevy truck spring over.
Axles have been completely gone through with new Yukon 5.38 gears,bearings,seals,Warn Premium lock outs. (open carriers)
New water pump, alternator, power steering pump, fan, belts, hoses, mild cam, valves, oil pan, distributor, plugs, wires, Edelbrock 1406 carb, intake, Blue torch flat fenders, battery, bumpers, clutch slave cylinder, 2 Bilstien 5150s on the front . The engine looked good when I pulled the heads, so no machine work was done.
Fresh paint (black cherry pearl, half gallon left over) looks about 3 different colors depending on light, fresh painted black 15x12 bullet hole wheels. (all paint is good enamel, hard as a rock.)
Extra roll cage, one my buddy took out of his, much better than stock.
What it needs:
your choice of tires. (I'll provide a set of rollers.)
brakes. (Just need bled.)
power steering pump bolted up and plumbed.
Interior cleaned up and bed lined or painted.
A spot on the driver door area fixed and painted again.
Hard half doors painted. (I have plenty of paint that'll go with it.)
Does not come with a top. The one on it was rotten and got tossed. I keep it in my shop.
Put a little time in it, a set of tires and you'll have a nearly new Jeep. The hard parts are done.
In the pics it has 39.5s on it. It has a 3" body lift that could be taken off and 35s would look good on it.
Link to more pics: http://s167.photobucket.com/albums/u128/Outfitter13/Jeep/
I can get more pics if interested just tell me what you'd like to see.
$3,000 Have ***le in hand. Need it gone.
![IMG_2385[1].jpg](http://attachments.www.hardlinecrawlers.com/xfmg/thumbnail/1/1412-3a665eabd5e69d836a6e509f11eb6a88.jpg?1625928181)