Markrobinson
Well-Known Member
- Joined
- Aug 13, 2010
- Messages
- 700
1995 Nissan Pathfinder XE
V6 (reman engine with less than 5k miles)
5 speed
3.96:1 Calmini geared transfer case
99-04 Dana 60 front axle (chromos, 35 spline outers, drive flanges, 5.38 gears, welded, ruffstuff cover)
14 bolt rear axle (stock shafts, welded, discs, tmr cover, lightly shaved)
Full hydro (trail gear)
3 link front with radflo 12" coilovers
4 link rear with XJ lift coils
Hybrid cage
39.5 pit bull rockers
Welded on diy beadlocks
Prp auto buckle harnesses (4)
This is a great running rig and while I won't say the typical "hurts a lot of feelings" BS, it does keep up pretty good. The bad would be that I removed the doors and intended to add a bunch of tube, bed liner on the floor, and some proarmor seats and didn't finish. You could bolt the front seats in today and rock out as it sits. I have 3 kids we were setting it up to carry with us, but priorities have changed and it needs to go. If I can't get a buyer for the whole thing, I'll part it out but I'd like to avoid that at this time. Also, this is the rig Ian built on Xtreme a decade ago. I got the tons beadlocks, etc from buying the discount Datsun build and mashing them up to build a 1 ton family crawler.
$7000 located in Murfreesboro 6159878152
V6 (reman engine with less than 5k miles)
5 speed
3.96:1 Calmini geared transfer case
99-04 Dana 60 front axle (chromos, 35 spline outers, drive flanges, 5.38 gears, welded, ruffstuff cover)
14 bolt rear axle (stock shafts, welded, discs, tmr cover, lightly shaved)
Full hydro (trail gear)
3 link front with radflo 12" coilovers
4 link rear with XJ lift coils
Hybrid cage
39.5 pit bull rockers
Welded on diy beadlocks
Prp auto buckle harnesses (4)
This is a great running rig and while I won't say the typical "hurts a lot of feelings" BS, it does keep up pretty good. The bad would be that I removed the doors and intended to add a bunch of tube, bed liner on the floor, and some proarmor seats and didn't finish. You could bolt the front seats in today and rock out as it sits. I have 3 kids we were setting it up to carry with us, but priorities have changed and it needs to go. If I can't get a buyer for the whole thing, I'll part it out but I'd like to avoid that at this time. Also, this is the rig Ian built on Xtreme a decade ago. I got the tons beadlocks, etc from buying the discount Datsun build and mashing them up to build a 1 ton family crawler.
$7000 located in Murfreesboro 6159878152
Attachments
-
A76040F7-A39E-4EA2-9901-87C57BEA250C.jpeg1.4 MB · Views: 1,327
-
024691CD-4A49-4361-BBD1-693C9DD4C1FD.jpeg2.4 MB · Views: 908
-
7E941767-86CD-48B1-A442-03CAF991EA4C.jpeg1.1 MB · Views: 483
-
D4E120B8-64EF-4BA3-9195-FA579F773626.jpeg1.1 MB · Views: 412
-
C8DF26A1-9DAC-4AF7-8BED-8721AFCE1060.jpeg1.3 MB · Views: 400
-
C9B1225B-1AFA-4A72-B0C8-D506E7B01BE4.jpeg1.9 MB · Views: 491
Last edited: