untchabl
On the Rocks
Bought this chassis a few months ago to build but I just don't have the time/desire to build a buggy from the ground up. I bought a ready to wheel buggy this weekend so I need to get this chassis out of my garage. I bought it exactly as you see it, I haven't had time to work on it at all.
Chassis was built by Chris Packard at Rockworks Fabrication in VA, although the PO did add some things after he got it
Chassis is 1.5" .120 wall DOM (I verified this with Chris after I bought it)
4-link front and rear (chassis side upper mounts are tacked on to roll it, all links are just to make it a roller)
Ballistic Fab 2.63" Heavy Duty weldable joints on all links (x16 total, 9/16" bolt hole, new used for mock up)
Fuel cell is 10-12 gallon plastic (17" wide x 16" long x 10" tall)
3-core aluminum radiator with aluminum shroud and electric fan (new in box)
PO said he had a 1.6/Sami 5-spd/Sami t-case mocked up in it before. I had planned to run a Tracker 2.0L/Tracker 4-spd auto/dual Toyota t-cases.
Call or text 919-214-69zero6 Located in Siler City, NC
What's listed below is all that is left. Will sell everything below as a package for $2,000.
- Chassis - $1800
- Ballistic joints - $35/each or $500 for all
- Aluminum radiator, shroud & electric fan - $160
- Fuel cell - $85
Will ship at buyers expense
Chassis was built by Chris Packard at Rockworks Fabrication in VA, although the PO did add some things after he got it
Chassis is 1.5" .120 wall DOM (I verified this with Chris after I bought it)
4-link front and rear (chassis side upper mounts are tacked on to roll it, all links are just to make it a roller)
Ballistic Fab 2.63" Heavy Duty weldable joints on all links (x16 total, 9/16" bolt hole, new used for mock up)
Fuel cell is 10-12 gallon plastic (17" wide x 16" long x 10" tall)
3-core aluminum radiator with aluminum shroud and electric fan (new in box)
PO said he had a 1.6/Sami 5-spd/Sami t-case mocked up in it before. I had planned to run a Tracker 2.0L/Tracker 4-spd auto/dual Toyota t-cases.
Call or text 919-214-69zero6 Located in Siler City, NC
What's listed below is all that is left. Will sell everything below as a package for $2,000.
- Chassis - $1800
- Ballistic joints - $35/each or $500 for all
- Aluminum radiator, shroud & electric fan - $160
- Fuel cell - $85
Will ship at buyers expense