For Sale is a 2003 Jeep Rubicon Project with only 26,000 original miles on it. This Jeep does have some minor dents and dings and is going to need a new hood, front fenders / flares (or have the tube fenders which are included finished being fabricated), new passenger side window glass, and possibly a new soft top. The front factory seats have been removed and a set of used aftermarket seats are now setting in it. The interior is pretty much complete however it is in need of a good cleaning. This Jeep has the 4.0L engine with 42RLE automatic transmission and NVG241OR transfer case with 4.0:1 low-range. The stock Dana 44 Rubicon axles and suspension have been removed and previously sold. This jeep is in the process of being converted over to 1 ton axles with a custom triangulated four link suspension which will need completed. The rear axle is a 1986 Corporate 14 Bolt which is the narrow version and is only 63" wide from WMS to WMS with 4.10 gears and a locker. The rear axle still needs installed, but is included with Jeep. This jeep still needs a front axle. The axles in the pictures are a set of roller axles and are not included. This Jeep does have a clean ***le and would make a very nice dual purpose vehicle or dedicated trail rig for someone wanting to get into four wheeling once finished. Feel free to contact me with any questions at 717-830-4018.
