actionjackson
Active Member
- Joined
- Jun 23, 2015
- Messages
- 28
'06 Wrangler, 4.0 6speed, 231. 51,985 miles. $10,000 firm or open to trades on a bigger 4 seater (JKU preferably, but open to anything) and can add some cash on top. Ray Township, Michigan.
super 30/35 4.56s ARBs. Compressor under hood.
4" rough country x-flex, savvy 1.25" body lift.
Metal cloak arched front fenders
Chromo savvy sliders with aluminum bases, savvy corners, under armor skid plate (has own cross member for drivetrain) and aluminum gas tank skid raised 1". TCase cable shifter.
Custom front stinger bumper
Rear poison spyder stinger swingdown.
Interior is raptor lined, some is starting to chip.
Stock seats with seat covers (sun faded... look pink now ) Rear seat was used maybe twice and has been out since.
33x13.50x15 pitbull rockers bias ply, worn but usable on 15x10 steel wheels. Spare has brand new tread, but has some cracking. (no leaks)
Would possibly let 2 33x14x15 boggers (brand new) on 15x10 steel wheels go with for asking price. Among some other random parts - have all new joints for suspension.
Bad: Rear arb leaks, still works as intended - compressor just runs constantly when rear is locked. I planned to swap axles (hp44, 14bolt) Just lost interest.
Oil pressure sending unit likes to make oil dummy gauge not work, have never lost oil pressure. Just never really cared because I don't drive it on the road, will probably get around to fixing this before it sells.
Also, I believe this is the original top has a few rips above doors but still seals up good.
super 30/35 4.56s ARBs. Compressor under hood.
4" rough country x-flex, savvy 1.25" body lift.
Metal cloak arched front fenders
Chromo savvy sliders with aluminum bases, savvy corners, under armor skid plate (has own cross member for drivetrain) and aluminum gas tank skid raised 1". TCase cable shifter.
Custom front stinger bumper
Rear poison spyder stinger swingdown.
Interior is raptor lined, some is starting to chip.
Stock seats with seat covers (sun faded... look pink now ) Rear seat was used maybe twice and has been out since.
33x13.50x15 pitbull rockers bias ply, worn but usable on 15x10 steel wheels. Spare has brand new tread, but has some cracking. (no leaks)
Would possibly let 2 33x14x15 boggers (brand new) on 15x10 steel wheels go with for asking price. Among some other random parts - have all new joints for suspension.
Bad: Rear arb leaks, still works as intended - compressor just runs constantly when rear is locked. I planned to swap axles (hp44, 14bolt) Just lost interest.
Oil pressure sending unit likes to make oil dummy gauge not work, have never lost oil pressure. Just never really cared because I don't drive it on the road, will probably get around to fixing this before it sells.
Also, I believe this is the original top has a few rips above doors but still seals up good.