bdillon2372
Well-Known Member
[size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt]I'm posting this for a friend, so if you have questions please call Chris at 423-605-4051
[/size][/size][/size][/size][/size][/size][/size][/size][/size]
2009 Jimmy Smith Chassis
462 Big Block Chevy Motor (woopow!)
350 Turbo Trans / 205 Transfer Case
14 Bolt Rear w/ Detroit Locker
Dodge Dana 60 Front w/ Powertrac Locker - Stock Dodge Drive Flanges
4:10 Gears
2.5 Fox Air Shocks All The Way Around
4" Fox Bumps in the Front
1 1/4" Heims on Lower Links to the Chassis
1 1/4" Johnny Joints on Lower Links to the Front End & Rear End
3/4" Heims on the Upper Links
Factory Knuckles w/ High Steer Arms
Tractor Supply 2" ram (not in pics)
Aluminum Radiator
18" Kirkey Seats w/ Brand New Covers (Black)
Simpson Racing Harnesses
Allied Rock 8 Beadkock Wheels
44" Boggers (cut) w/ 70% Tread
Orbital Valve w/Quick Disconnect Steering
B&M Quarter Stick Shifter
Mile marker 12,000 lb winch
[size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt]$15,000 OBO CALL CHRIS AT 423-605-4051 (IF NO ANSWER LEAVE MESSAGE,SOMETIMES NO CELL SERVICE AT WORK)[size=10pt]
[/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size]
Look, this is almost a complete running buggy, for the most part all it really lacks is for someone to run hydraulic lines, brake lines, wire & plumb it (run rubber hoses as coolant runs through chassis), floor boards & tunnel, sand blast & powder coat, & someone will have a[size=10pt] BAD RIDE[/size]
[/size][/size][/size][/size][/size][/size][/size][/size][/size]
2009 Jimmy Smith Chassis
462 Big Block Chevy Motor (woopow!)
350 Turbo Trans / 205 Transfer Case
14 Bolt Rear w/ Detroit Locker
Dodge Dana 60 Front w/ Powertrac Locker - Stock Dodge Drive Flanges
4:10 Gears
2.5 Fox Air Shocks All The Way Around
4" Fox Bumps in the Front
1 1/4" Heims on Lower Links to the Chassis
1 1/4" Johnny Joints on Lower Links to the Front End & Rear End
3/4" Heims on the Upper Links
Factory Knuckles w/ High Steer Arms
Tractor Supply 2" ram (not in pics)
Aluminum Radiator
18" Kirkey Seats w/ Brand New Covers (Black)
Simpson Racing Harnesses
Allied Rock 8 Beadkock Wheels
44" Boggers (cut) w/ 70% Tread
Orbital Valve w/Quick Disconnect Steering
B&M Quarter Stick Shifter
Mile marker 12,000 lb winch
[size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt][size=10pt]$15,000 OBO CALL CHRIS AT 423-605-4051 (IF NO ANSWER LEAVE MESSAGE,SOMETIMES NO CELL SERVICE AT WORK)[size=10pt]
[/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size][/size]
Look, this is almost a complete running buggy, for the most part all it really lacks is for someone to run hydraulic lines, brake lines, wire & plumb it (run rubber hoses as coolant runs through chassis), floor boards & tunnel, sand blast & powder coat, & someone will have a[size=10pt] BAD RIDE[/size]