bluzuk80
Well-Known Member
A friend of mine built this buggy. I scooped it up last february and have riding several times while improving the buggy along the way.
-narrowed and shortened CJ grill
narrowed CJ hood
55" wide chassis at the shoulder tubes
72" tall
112" wheelbase
-2001 5.3 Vortec-Jim's Performance harness, K&N intake, Headers, Motor is very strong!!
Rebuilt 4L60E-receipt provided
Art Carr shifter
Dana 300 w/ twin sticks
Tom Woods 1350 driveshafts-front is BRAND NEW,not one ride yet on it, two-piece with Tom's carrier bearing
CUCV One Tons 60 front, Alloy USA 35 spline chromo stubs; ECGS drive flanges, welded,-Undercover Fab 3/8 cover
14 bolt rear, Detroit 4.56s -Undercover Fab 3/8 rear 13 bolt cover and shaved, RuffStuff rear truss
-39 REDLABELS, two rides
-Trailready HDs, two rides
-Fox 2.0 air shocks
double triangulated 4-link front and rear
RuffStuff rear truss
3/4"x7/8" heims all the way around
2"x.250" lower links; 1.75"x.120" upper links
-16 gal. Jaz fuel cell
Speedway dual pass aluminum radiator
SPAL electric fan with a fabricated aluminum shroud; the engine controls the
fan
-Corbeau Ultra SS seats
-Crow Enterprizes harnesses
-Warn M8000 winch with synthetic rope
-PSC Full hydraulic steering,-Huge steering cooler
-Wilwood brake pedal and master cylinders
-CNC gas pedal
-Derale Transcooler with fan mounted behind pass seat
-BTF limit straps
-Swag offroad Actionpacker mount
-Rock lights
The only problems this buggy has right now is one bad rear airshock and the PSC pump is going bad. I have a new pump and two rear shocks on the way. Can be bought as is for a little discount
Shes clean and ready to go, had a guy come look at it yesterday from nine hours away and liked it alot, but got offered another buggy at a hell of a deal and couldnt refuse it. He would be a good reference if somebody far off was interested, PM and ill give you his contact info.
Asking $20k or $17k without wheels and tires, do have some 35in rollers on ram 2500 17s. Or like I mentioned above, will knock off some if someone wanted to buy it with bad pump and airshock
** Would accept LS motor, Coilovers, Heims or other buggy parts on trade. Might even take a stock Samurai on partial trade**
Tim 662.322.7242 located in North Mississippi
-narrowed and shortened CJ grill
narrowed CJ hood
55" wide chassis at the shoulder tubes
72" tall
112" wheelbase
-2001 5.3 Vortec-Jim's Performance harness, K&N intake, Headers, Motor is very strong!!
Rebuilt 4L60E-receipt provided
Art Carr shifter
Dana 300 w/ twin sticks
Tom Woods 1350 driveshafts-front is BRAND NEW,not one ride yet on it, two-piece with Tom's carrier bearing
CUCV One Tons 60 front, Alloy USA 35 spline chromo stubs; ECGS drive flanges, welded,-Undercover Fab 3/8 cover
14 bolt rear, Detroit 4.56s -Undercover Fab 3/8 rear 13 bolt cover and shaved, RuffStuff rear truss
-39 REDLABELS, two rides
-Trailready HDs, two rides
-Fox 2.0 air shocks
double triangulated 4-link front and rear
RuffStuff rear truss
3/4"x7/8" heims all the way around
2"x.250" lower links; 1.75"x.120" upper links
-16 gal. Jaz fuel cell
Speedway dual pass aluminum radiator
SPAL electric fan with a fabricated aluminum shroud; the engine controls the
fan
-Corbeau Ultra SS seats
-Crow Enterprizes harnesses
-Warn M8000 winch with synthetic rope
-PSC Full hydraulic steering,-Huge steering cooler
-Wilwood brake pedal and master cylinders
-CNC gas pedal
-Derale Transcooler with fan mounted behind pass seat
-BTF limit straps
-Swag offroad Actionpacker mount
-Rock lights
The only problems this buggy has right now is one bad rear airshock and the PSC pump is going bad. I have a new pump and two rear shocks on the way. Can be bought as is for a little discount
Shes clean and ready to go, had a guy come look at it yesterday from nine hours away and liked it alot, but got offered another buggy at a hell of a deal and couldnt refuse it. He would be a good reference if somebody far off was interested, PM and ill give you his contact info.
Asking $20k or $17k without wheels and tires, do have some 35in rollers on ram 2500 17s. Or like I mentioned above, will knock off some if someone wanted to buy it with bad pump and airshock
** Would accept LS motor, Coilovers, Heims or other buggy parts on trade. Might even take a stock Samurai on partial trade**
Tim 662.322.7242 located in North Mississippi


