onetoncrawler
Well-Known Member
Sold
2012 Buggy For Sale
Kore 54€ Defender Chassis with custom front end
21€ belly clearance, 75€ top of cage, 110€ WB, 7€ uptravel front, 8.5€ uptravel rear
Jim€™s Fiberglass JK Grille, Hood, & Cowl
Essentially Offroad custom interior €" all aluminum €" front firewall, floor & tunnel all covered with line-x
Custom aluminum dash with Autometer volt, temp, oil PSI & Trans temp gauges €" aluminum center console with cubby hole and 2 cup holders
2007 Chevy 6.0 with LS2 intake, Throttle body & injectors €" Dyno tuned - WOD accessory re-locator kit for PWR steering and alternator €" Kevko pan with Lokar locking braided dip stick €" Summit Racing Headers €" single dump exhaust with Magnaflow muffler
PSC N-Pump, steering valve & reservoir
Performance Torque Converters (PTC) TH400 with reverse manual valve body & compression braking €" HD aluminum deep pan €" lokar locking braided dip stick
Atlas II 3.0 transfer case with HD outputs and 1410 yokes €" standard mechanical shifters
Trans and transfer case vents are routed to an All-Star catch can to prevent spills during a rollover
Front end €" EOR built 14 Bolt €" 5.13 gears, Detroit Locker, Barnes 4wd Diff high clearance cover - Solid Axle inner C€™s, knuckles & high steer arms €" Yukon Hardcore Spindles and Hubs €" RCV nickel plated shafts, RCV drive flanges €" Spidertrax 3/8 thick drilled rotors, Willwood Dynalite calipers & pads €" all stainless braided brake lines, pinion guard, 1410 yoke
Rear end €" 14 bolt €" 5.13 gears, welded carrier, Barness 4wd high clearance cover, Spidertrax 3/8 thick drilled rotors, Willwood Dynalite calipers & pads €" all stainless braided brake lines, stock axle shafts with a set of spare shafts, pinion guard, 1410 yoke
PRC Custom Aluminum 30x19 Radiator €" AN fittings, steam port built in (steam port plumbed with AN/Stainless braided line
Dirt track style aluminum shifter with EOR cable set up €" no detents (other than park)
Fox 2€ remote reservoir shocks with PAC racing springs (16€ rear, 14€ front)
Fox 2€ x 4€ bump stops on the front
7075 Aluminum links 1.25€ heims on the lowers, 7/8€ heims on the uppers
12 gallon fuel cell with AN fittings/braided hose €" Walbro pump w/ WIX corvette filter/reg
HD driveshafts with 1410 spicer joints - EOR carrier bearing set-up
LED tail lights and reverse lights €" can install a yellow and a blue in the reverse lights to be KOH legal
Pro-Comp headlights
Optima Yellow Top Battery in BTF tray
Rough Country winch with Custom Splice synthetic rope & wireless remote
Corbeau Ultra seats with Crow 3€ padded 5 point harnesses
Aluminum roof and side panels
Professionally painted with Ford Tuxedo Black Metallic w/ double pearl
½€ 6061 aluminum skid plate
located in North Alabama 35761
Price $43,000 - PM for Contact info
2012 Buggy For Sale
Kore 54€ Defender Chassis with custom front end
21€ belly clearance, 75€ top of cage, 110€ WB, 7€ uptravel front, 8.5€ uptravel rear
Jim€™s Fiberglass JK Grille, Hood, & Cowl
Essentially Offroad custom interior €" all aluminum €" front firewall, floor & tunnel all covered with line-x
Custom aluminum dash with Autometer volt, temp, oil PSI & Trans temp gauges €" aluminum center console with cubby hole and 2 cup holders
2007 Chevy 6.0 with LS2 intake, Throttle body & injectors €" Dyno tuned - WOD accessory re-locator kit for PWR steering and alternator €" Kevko pan with Lokar locking braided dip stick €" Summit Racing Headers €" single dump exhaust with Magnaflow muffler
PSC N-Pump, steering valve & reservoir
Performance Torque Converters (PTC) TH400 with reverse manual valve body & compression braking €" HD aluminum deep pan €" lokar locking braided dip stick
Atlas II 3.0 transfer case with HD outputs and 1410 yokes €" standard mechanical shifters
Trans and transfer case vents are routed to an All-Star catch can to prevent spills during a rollover
Front end €" EOR built 14 Bolt €" 5.13 gears, Detroit Locker, Barnes 4wd Diff high clearance cover - Solid Axle inner C€™s, knuckles & high steer arms €" Yukon Hardcore Spindles and Hubs €" RCV nickel plated shafts, RCV drive flanges €" Spidertrax 3/8 thick drilled rotors, Willwood Dynalite calipers & pads €" all stainless braided brake lines, pinion guard, 1410 yoke
Rear end €" 14 bolt €" 5.13 gears, welded carrier, Barness 4wd high clearance cover, Spidertrax 3/8 thick drilled rotors, Willwood Dynalite calipers & pads €" all stainless braided brake lines, stock axle shafts with a set of spare shafts, pinion guard, 1410 yoke
PRC Custom Aluminum 30x19 Radiator €" AN fittings, steam port built in (steam port plumbed with AN/Stainless braided line
Dirt track style aluminum shifter with EOR cable set up €" no detents (other than park)
Fox 2€ remote reservoir shocks with PAC racing springs (16€ rear, 14€ front)
Fox 2€ x 4€ bump stops on the front
7075 Aluminum links 1.25€ heims on the lowers, 7/8€ heims on the uppers
12 gallon fuel cell with AN fittings/braided hose €" Walbro pump w/ WIX corvette filter/reg
HD driveshafts with 1410 spicer joints - EOR carrier bearing set-up
LED tail lights and reverse lights €" can install a yellow and a blue in the reverse lights to be KOH legal
Pro-Comp headlights
Optima Yellow Top Battery in BTF tray
Rough Country winch with Custom Splice synthetic rope & wireless remote
Corbeau Ultra seats with Crow 3€ padded 5 point harnesses
Aluminum roof and side panels
Professionally painted with Ford Tuxedo Black Metallic w/ double pearl
½€ 6061 aluminum skid plate
located in North Alabama 35761
Price $43,000 - PM for Contact info
uke: if it sells
