Lickliter21
Well-Known Member
Rock bouncing tube Buggy was built to be tough and reliable
1.75 .120 DOM chassis
All tabs and brackets on the buggy minimum of 3/8 steel.
All aluminum 3/16 floor and fire wall
PRP Competition High Back Seat
That are +3 +6
Fit up to about a 6'-4" driver
PRP 3" padded seat belts
2 brake pedals and master cylinder for front and rear brakes.
Quick disconnect steering wheel.
All waterproof rocker switches.
From otrattw.
Small storage box between the seats.
Warning lights for water temp. and oil psi.
Red top optima battery.
Fire extinguisher easy to reach while belted tight.
All fuses and wiring connection made with heat shrink connectors.
2004 6.0 Chevy LS engine cut down wiring harness. GM hot cam custom dyno tune. Intake turned around
400 turbo trans with racing clutches 4500 stall, valve body mod won't shift out of first till the shifters moved. large cooler with built in fan.
Ford 205 with 32 spline input and outputs. 1350 front U joints 1410 rear Joint. Forged yokes. Bolted to the 400 with factory adapter.
44x18.5x15 cut TSL front
44x19.5x15 heavily grooved Boggers
All the tires has plugs patches and tube in them
Coleworx aluminum bead lock rings
14 bolt front axle RCV axles 5:13 gears with spool. 1.25 thick high steer arms. 1.25 hiems for tie rod ends. 3/8 think diff cover.
4"X3/4" axle tubes
14 bolt rear disk brake 5:13 gear
3/8 think diff cover
2.25" 7075 WOD lower links with 1.25 hiems
2" 7075 WOD upper links with 1.25 hiems
2.5" FOA 18" piggy back reservoir coilovers
Aluminum radiator with large cooling fan. Fan is automatic and switch override.
Aluminum fuel cell holds 7 gallons. No foam.
Walbo fuel pump corvette regulator. All stainless steel braided hose and AN fittings.
3980 LBS
70" tall
21" ground clearance
Gonna hang on to it a while
Call or Text 1-502-680-321nine
Thanks Dean
http://youtu.be/MHc24fu9C9w
Sent from my iPhone using Tapatalk
1.75 .120 DOM chassis
All tabs and brackets on the buggy minimum of 3/8 steel.
All aluminum 3/16 floor and fire wall
PRP Competition High Back Seat
That are +3 +6
Fit up to about a 6'-4" driver
PRP 3" padded seat belts
2 brake pedals and master cylinder for front and rear brakes.
Quick disconnect steering wheel.
All waterproof rocker switches.
From otrattw.
Small storage box between the seats.
Warning lights for water temp. and oil psi.
Red top optima battery.
Fire extinguisher easy to reach while belted tight.
All fuses and wiring connection made with heat shrink connectors.
2004 6.0 Chevy LS engine cut down wiring harness. GM hot cam custom dyno tune. Intake turned around
400 turbo trans with racing clutches 4500 stall, valve body mod won't shift out of first till the shifters moved. large cooler with built in fan.
Ford 205 with 32 spline input and outputs. 1350 front U joints 1410 rear Joint. Forged yokes. Bolted to the 400 with factory adapter.
44x18.5x15 cut TSL front
44x19.5x15 heavily grooved Boggers
All the tires has plugs patches and tube in them
Coleworx aluminum bead lock rings
14 bolt front axle RCV axles 5:13 gears with spool. 1.25 thick high steer arms. 1.25 hiems for tie rod ends. 3/8 think diff cover.
4"X3/4" axle tubes
14 bolt rear disk brake 5:13 gear
3/8 think diff cover
2.25" 7075 WOD lower links with 1.25 hiems
2" 7075 WOD upper links with 1.25 hiems
2.5" FOA 18" piggy back reservoir coilovers
Aluminum radiator with large cooling fan. Fan is automatic and switch override.
Aluminum fuel cell holds 7 gallons. No foam.
Walbo fuel pump corvette regulator. All stainless steel braided hose and AN fittings.
3980 LBS
70" tall
21" ground clearance
Gonna hang on to it a while
Call or Text 1-502-680-321nine
Thanks Dean
http://youtu.be/MHc24fu9C9w
Sent from my iPhone using Tapatalk
