205 cable shifters

[onetoncrawler]

any one made any cable shifters using parts from McMaster Carr????

i was thinking of ordering and trying some of these

http://www.mcmaster.com/#throttle-cable/=7tkma8


Cable Cable Core Max. Push/Pull Bend Lg. Ht. Dia. Mounting
Lg. (A) OD (B) Dia. (C) Stroke Load, lbs. Radius (D) (E) (F) Thread Sz.

Lever Controlled
7'3" 0.19" .054" 1.69" 20/20 2" 3.187" 3.44" ___ ___

PART # = 2461K21

i will have to measure the stroke, but I am afraid the 1.69" will not cover all of the required shifts


thoughts???? Thanks

 

[GONOVRIT]

I would love to do that but I'm not going to be the test dummy. Can't find time to work on my junk as it is :

 

[CSMITH]

just buy the kit . tight wad

 

[Rokcrler]

These seem to work great:
Cables are McMaster-Carr, part #1338K21, "Low Friction Threaded-Mount Push/Pull Cable, 1/4"-28 Threaded Ends, 4' Overall Length"
Clevises are McMaster-Carr, part #6071K12, "Forged Steel Clevis Rod End, 1/4"-28 Female Thread Size, 2" Length"
Look at this thread
http://www.pirate4x4.com/forum/showthread.php?t=572045

 

[onetoncrawler]

These seem to work great:
Cables are McMaster-Carr, part #1338K21, "Low Friction Threaded-Mount Push/Pull Cable, 1/4"-28 Threaded Ends, 4' Overall Length"
Clevises are McMaster-Carr, part #6071K12, "Forged Steel Clevis Rod End, 1/4"-28 Female Thread Size, 2" Length"
Look at this thread
http://www.pirate4x4.com/forum/showthread.php?t=572045

Thanks MO

just buy the kit . tight wad

id love to, but its not in the budget right now...this ninja's broke :****:

 

[cheroking]

I am using those cables and they work great.

 

[mud4me]

You can get them a little cheaper from the midwest control website. Look here for the cables.
http://www.midwestcontrol.com/catdisplay_short.php?pg=574
I got mine from there, they have all the clevises and pins etc that you need. I got everything from them as it was a bit cheaper for the same cable.