-
Help Support Hardline Crawlers :
205 twin stick
- Thread starter Rob8003
- Start date
85toyo
Well-Known Member
85toyo said:
I installed this same set a month ago. Easy instructions and worked perfect.
huff75
Well-Known Member
- Joined
- Nov 2, 2012
- Messages
- 62
You talking about the shifter or the shift rails. I modified my rails myself. Its easy and there is a lot of info how. As far as shifters I was going to order a set from JB custom fab.
http://jbfab.net/
http://jbfab.net/
leeman1790
Well-Known Member
huff75 said:
I modified my stock rails too. I have triple sticks from offroad designs.
Same here i modified my rails and made my own shifters out of some flat stock and tierod end from a lawn mower ;D.. laugh if you want but it works great ill try and post pics ....just be extra carefull when or if you decide to grind your rails, do it slow and check it often or you'll be able to shift front and rear in high or low range at the same time and have a lot of broke parts. I was to cheap to buy the after market stuff.
ridered3
Not Rigless
Rob8003 said:
So for the next guy that searches for twin stick 205 info, what did you end up doing for it?
fishinfool98
Well-Known Member
- Joined
- Nov 12, 2011
- Messages
- 195
Re: Re: 205 twin stick
I went with the jb fab cable shifters and like them a lot even ordered their shift rails and just got them in the mail.
Sent from my XT907 using Tapatalk 2
I went with the jb fab cable shifters and like them a lot even ordered their shift rails and just got them in the mail.
Sent from my XT907 using Tapatalk 2
Rockwells607
Well-Known Member
If you want to modifie it yourself , grinde or mill the flats on the rear shift rail 7/16" longer than they are ( go the way the angle on the flat is) you can usually see wear marks the direction you want to go , also making the detents a little deeper seems to make it not pop outta gear
