Jduck
Well-Known Member
In the spirit of hoping to try and bring some more tech back to the site Im posting up this buggy I just finished up. Will update pics as the owner sends them.
Specs
8.1 vortec
TH400
203/205 doubler
Rockwells
46" Claws
Wheelbase--125"
Roof at full bump--73"
Belly at bump--20"
Whole buncha tubing
Starting to take shape. All this is 1.75x.188 wall except the rear hip bar and two diagonal down bars in the back
Front fenders/stinger
Interior bracing
Cowl/Windshield bars
F'd up the measurement for the rear seat area, had to cut out and modify the rear "frame rails" But as it is there is enough room for someone 6' tall
Subframe is 1.75x.188 with .120 wall bracing
Rear 4 link in
Drivetrain mocked in along with seats and rear axle bolted up
Front end under it and rolling at bump
Loaded on trailer headed to owners home
Specs
8.1 vortec
TH400
203/205 doubler
Rockwells
46" Claws
Wheelbase--125"
Roof at full bump--73"
Belly at bump--20"
Whole buncha tubing
Starting to take shape. All this is 1.75x.188 wall except the rear hip bar and two diagonal down bars in the back
Front fenders/stinger
Interior bracing
Cowl/Windshield bars
F'd up the measurement for the rear seat area, had to cut out and modify the rear "frame rails" But as it is there is enough room for someone 6' tall
Subframe is 1.75x.188 with .120 wall bracing
Rear 4 link in
Drivetrain mocked in along with seats and rear axle bolted up
Front end under it and rolling at bump
Loaded on trailer headed to owners home