Sold/Expired .

TBItoy · Jul 16, 2015

engine sold

C6 full rebuild by KillerB never ran, standard pattern manual valvebody conversion, includes stock torque converter

3spd stak 5.44/3.05/1 no yokes.

$2000 for both OR will take 2005+ Super Duty Dana 60s on trade or guns. I like guns too. and dual sport dirt bikes.
Cookeville TN

TBItoy · Sep 14, 2015

Re: 351w, built C6, 3spd STaK, intake and propane kit

TOP

broncomike · Sep 15, 2015

Re: 351w, built C6, 3spd STaK

How much for the 351? I got a 56 f100 that needs it.

TBItoy · Sep 15, 2015

Re: Re: 351w, built C6, 3spd STaK

broncomike said:
How much for the 351? I got a 56 f100 that needs it.

$750, it's got a new water pump, new reuseable valve cover and oil pan gaskets, also includes new truck shorty headers/gaskets/etc, and alum 4bbl intake, serpentine setup, Saginaw conversion PS pump, 160 amp 3g alternator, and a new Ac bypass pulley.

All you'd need is a distributer/ignition

broncomike · Sep 15, 2015

Re: 351w, built C6, 3spd STaK

Give me a call on that. Don't need the headers or ps. Mike two055593931

TBItoy · Sep 15, 2015

Re: Re: 351w, built C6, 3spd STaK

broncomike said:
Give me a call on that. Don't need the headers or ps. Mike two055593931

I'll holler at you tomorrow

jeepwyo · Sep 17, 2015

Re: 351w, built C6, 3spd STaK

What drop on the stak? Input spline count? And most of all $?

TBItoy · Sep 17, 2015

Re: Re: 351w, built C6, 3spd STaK

jeepwyo said:
What drop on the stak? Input spline count? And most of all $?

It's for the c6, driver drop, 31 spline.

I'd take $1500 for the stak alone.

wimpykid · Sep 18, 2015

Re: 351w, built C6, 3spd STaK

How long is the STAK, front to rear ?

TBItoy · Sep 18, 2015

Re: 351w, built C6, 3spd STaK

wimpykid said:
How long is the STAK, front to rear ?

about 11". the shifter rail cover extension thing is a few inches longer.

It's about the size of 205, just a little more girth.

generic picture with a 241 and a D300

131_0601_11_z%2Bstak_3_speed_transfer_case%2Bcomparision.jpg

Dvaughn1971 · Sep 19, 2015

Re: 351w, built C6, 3spd STaK

How much for the propane kit, tanks, intake, and headers

TBItoy · Sep 19, 2015

Re: 351w, built C6, 3spd STaK

Dvaughn1971 said:
How much for the propane kit, tanks, intake, and headers

$500

There is no plumbing with the propane kit, just mixer, throttle plate, evap, and lock off

cgriffin224 · Oct 1, 2015

Re: 351w, built C6, 3spd STaK

Shoot me a text on stak 231-330-3113
Chase

TBItoy · Oct 5, 2015

Re: 351w, built C6, 3spd STaK

ttt

had some interest on the stak, but no $

TBItoy · Oct 12, 2015

Re: 351w, built C6, 3spd STaK

got a deposit on the 351

anyone want the stak?

broncoparts · Oct 12, 2015

Re: 351w, built C6, 3spd STaK

How much for the C6?

TBItoy · Oct 13, 2015

Re: Re: 351w, built C6, 3spd STaK

broncoparts said:
How much for the C6?

$500.

Will sell it and the stak together for $2000 cash firm

TBItoy · Oct 16, 2015

Re: Built C6 (never ran), 3spd STaK. Will take 05+ Super Duty axles on trade.

ttt

looking for 2005+ Super Duty axles on trade.

I would really like 3 complete front axles with at least 2 having 4.10 or 4.30 gears.

I would value complete axles (calipers/lockouts/etc) at $600 trade value. I figure this is fair since they are regularly listed for less at junkyards.