J
Joc
Guest
I've posted this before and decided to just keep it but now Im ready to move on to something else. Just bought a razr s yesterday so i dont see this thing getting used much from here on out.
1988 samurai with clean ***le
1.3 fuel injected
5spd
6.5-1 case bigger gears for strength
1310 driveshafts with c.v on rear
dana 44 axles
supieror axleshafts
ctm ujoints
detroit lockers
5.89 gears
warn premium hubs
coil spring suspension with fourlink front and rear
7/8 heim joints
1 1/2 link bars
bilstien 5150 shocks
like new 39.5 Iroks with beadlock wheels
racing seats
4point harnesses
red top optima battery
hydraulic steering setup with cooler
10 gal fuel cell
large tool box with plenty room with fuelcell inside
cd player with aux jack
cb radio
warn 8000xi winch
side of frame is beefed up with 1/4 steel
has steel belly pan, think its 1/4 thick
custom tcase cradle
Wheelbase - 108"-109"
Few small spare parts come with it
THE BAD:
It needs valve seals or rings. It smokes alot when first cranked from sitting. Smokes a little on high revs. alot of these sammys smoke so i've never tried to fix it.
$7500
Location: Tuscumbia, AL 35674
Josh 256-762-four four one eight txt or call after 3pm during week Thanks
Most recent trail pics from Superlift Nov. 5
Can throw in air shocks for an additional $700
2- New big horn 16"
2- Used fox 18" that look barely used
Just lost interest in getting them put on
I will not sell the shocks seperate
.
1988 samurai with clean ***le
1.3 fuel injected
5spd
6.5-1 case bigger gears for strength
1310 driveshafts with c.v on rear
dana 44 axles
supieror axleshafts
ctm ujoints
detroit lockers
5.89 gears
warn premium hubs
coil spring suspension with fourlink front and rear
7/8 heim joints
1 1/2 link bars
bilstien 5150 shocks
like new 39.5 Iroks with beadlock wheels
racing seats
4point harnesses
red top optima battery
hydraulic steering setup with cooler
10 gal fuel cell
large tool box with plenty room with fuelcell inside
cd player with aux jack
cb radio
warn 8000xi winch
side of frame is beefed up with 1/4 steel
has steel belly pan, think its 1/4 thick
custom tcase cradle
Wheelbase - 108"-109"
Few small spare parts come with it
THE BAD:
It needs valve seals or rings. It smokes alot when first cranked from sitting. Smokes a little on high revs. alot of these sammys smoke so i've never tried to fix it.
$7500
Location: Tuscumbia, AL 35674
Josh 256-762-four four one eight txt or call after 3pm during week Thanks
Most recent trail pics from Superlift Nov. 5
Can throw in air shocks for an additional $700
2- New big horn 16"
2- Used fox 18" that look barely used
Just lost interest in getting them put on
I will not sell the shocks seperate
.
