whyjwill
Member
- Joined
- Jun 23, 2011
- Messages
- 12
Looking to sell my Jeep. Its a 94 YJ.
Engine:
4.9L Stroker with ~600 miles on it
Fully rebuilt by professional machine shop in fall of 2010
Billet H-beam rods
Forged Pistons
Cam
Lots of head work.
Trans/T-Case:
NV4500 transmission with ~600 miles on it. was put in with new engine in fall of 2010
Atlas 4.3:1 Transfer case was installed new with engine and transmission.
Axles:
2008 JK Rubicon Dana 44's front and rear. Full width (65")
Auburn ECTED lockers front and rear
Axles have ~ 2500 miles on them. I bought new and installed in 2008.
Front axle is trussed on long side for added strength
Tires:
315/75R17 (35") Pro-Comp Extreme Mud Terrains. 80% tread left. Some normal rock rash. Mounted on 17X9 Crager black steel wheels with 5 on 5 bolt pattern.
Suspension:
SOA with 1.5" RE Springs and 1" Shackles
1" Body lift
RE Shocks
Miscellaneous:
Taurus Electric Fan
York On-Board Air with two storage tanks
Full 6 Point Roll Cage teid into frame in all 6 locations
New Corbeau Seats with 5 point harnesses mounted to roll cage
Hand throttle on shifter
Fully bed lined interior
Bed lined storage box with lock in place of rear seat
Warn bumpers front and rear
Warn 9.5 winch with in cab controls
Hi-Lift Jack mounted to roll cage
New Tom Woods heavy duty driveshafts front and rear.
Heavy duty diff covers
2 Custom skid plates covering from oil pan to rear of transfer case
PRICE: $12K OBO
see pics here:
http://www.flickr.com/photos/28743642@N02/sets/72157626861546123/
Located in Tuscaloosa, AL
Engine:
4.9L Stroker with ~600 miles on it
Fully rebuilt by professional machine shop in fall of 2010
Billet H-beam rods
Forged Pistons
Cam
Lots of head work.
Trans/T-Case:
NV4500 transmission with ~600 miles on it. was put in with new engine in fall of 2010
Atlas 4.3:1 Transfer case was installed new with engine and transmission.
Axles:
2008 JK Rubicon Dana 44's front and rear. Full width (65")
Auburn ECTED lockers front and rear
Axles have ~ 2500 miles on them. I bought new and installed in 2008.
Front axle is trussed on long side for added strength
Tires:
315/75R17 (35") Pro-Comp Extreme Mud Terrains. 80% tread left. Some normal rock rash. Mounted on 17X9 Crager black steel wheels with 5 on 5 bolt pattern.
Suspension:
SOA with 1.5" RE Springs and 1" Shackles
1" Body lift
RE Shocks
Miscellaneous:
Taurus Electric Fan
York On-Board Air with two storage tanks
Full 6 Point Roll Cage teid into frame in all 6 locations
New Corbeau Seats with 5 point harnesses mounted to roll cage
Hand throttle on shifter
Fully bed lined interior
Bed lined storage box with lock in place of rear seat
Warn bumpers front and rear
Warn 9.5 winch with in cab controls
Hi-Lift Jack mounted to roll cage
New Tom Woods heavy duty driveshafts front and rear.
Heavy duty diff covers
2 Custom skid plates covering from oil pan to rear of transfer case
PRICE: $12K OBO
see pics here:
http://www.flickr.com/photos/28743642@N02/sets/72157626861546123/
Located in Tuscaloosa, AL
