monsterjeep44
Member
- Joined
- Oct 25, 2013
- Messages
- 13
I have a 95 Jeep Wrangler that the body has been boat sided with 1 1/2 X .120 wall tubing, run all the way around the bottom of the body. I have two fiberglass tops, plans were to combine to make one four door, I have the full 4 doors and 4 half doors. One ton axles, Dana 60 Front new king pins, locking hubs. 14 bolt, Rear ARB Air locker, both have 456 gears. Rear has been 4-linked with 2" 7075 Alum bars and Johnny Joints. Front has springs with Hydro Assist.
Custom 1 3/4 X .120 wall DOM tubing work. No motor or transfer case, but mounts for all are there. I can finish the job for someone if needed or sell outright and you can finish. Started a different project on a buggy and just don't need this one. 5000.00 Call or text Jason 336-978-9127
Custom 1 3/4 X .120 wall DOM tubing work. No motor or transfer case, but mounts for all are there. I can finish the job for someone if needed or sell outright and you can finish. Started a different project on a buggy and just don't need this one. 5000.00 Call or text Jason 336-978-9127
