Sold/Expired 95 Jeep YJ Custom Four Door

[monsterjeep44]

I have a 95 Jeep Wrangler that the body has been boat sided with 1 1/2 X .120 wall tubing, run all the way around the bottom of the body. I have two fiberglass tops, plans were to combine to make one four door, I have the full 4 doors and 4 half doors. One ton axles, Dana 60 Front new king pins, locking hubs. 14 bolt, Rear ARB Air locker, both have 456 gears. Rear has been 4-linked with 2" 7075 Alum bars and Johnny Joints. Front has springs with Hydro Assist.
Custom 1 3/4 X .120 wall DOM tubing work. No motor or transfer case, but mounts for all are there. I can finish the job for someone if needed or sell outright and you can finish. Started a different project on a buggy and just dont need this one. $7500.00 ...Call 336-978-9127 or 704-892-4555

 

[monsterjeep44]

 

[Eddyj]

Wheelbase?

 

[monsterjeep44]

The wheel base is 138''.

 

[mgiles]

Do you still have this?

 

[monsterjeep44]

Yes I do...would you like to take a look?

 

[monsterjeep44]

bump

 

[mgiles]

What motor nd tranny combination is it set up for

 

[monsterjeep44]

It is set up for a vortec 350. I built a 383 stroker motor to put in it with a 700r4 trans and a 205 transfer case.

 

[monsterjeep44]

bump

 

[monsterjeep44]