bronco39
Well-Known Member
- Joined
- Dec 6, 2010
- Messages
- 53
SOLD SOLD SOLD
Just looking to possibly change things up a little. Would really like to trade for another 4 seater (NO Cherokees, 4Runners, Blazers, etc). Looking to go smaller but fully built - at least 1 tons, 40's or bigger, V8, auto - in a buggy/juggy or could be full bodied Jeep. May even consider the right 2 seat buggy. This Jeep has been a blast -I just get bored easily and always looking for something different. If I can't find something else, I'll continue to wheel this one !
UPDATE - I really would prefer to trade, but since so many have asked - $21k cash price
On to the details -
1998 TJ (clean Missouri title in hand)
DRIVETRAIN
- 4.0 (cold air intake)
-RH32 tranny (heavy clutches, non lock-up converter, tranny cooler, etc.)
- 203/205 doubler triple-stick transfer case from Wagner Machine
FRONT AXLE
-2.5 ton Rockwell (shaved, hubs flipped, pinion brake, welded, all new seals throughout)
-1350/1410 u-joints
REAR AXLE
-2.5 ton Rockwell steering axle (shaved, hubs flipped, pinion brake w/ line lock for front digs, welded, all new seals)
-1350/1410 u-joints
STEERING
-Full PSC hydraulic system
-Front has 3"x9" ram mounted behind axle for complete protection
-Rear has dual 2"x8" rams
-PSC orbital (4.2 turns from lock to lock)
-PSC rear steer controls mounted in factory e-brake location
-PSC pump and resevoir
-5/8" heims and .25" wall tube on all tie rods
-BTF high steer arms on rear
SUSPENSION
-4-link front and rear
-Frame has been back halved
-1.75" x 3/8" wall DOM lower arms
-1.5" x 1/4" wall DOM uppers
-Front is all Rubicon Express super flex joints
-Rear is Rubicon Express super flex joints on lowers and 7/8" heims on uppers
-Bilstein reservoir shocks on front
-Timbren bumpstops on front
-Limit straps
-ProComp shocks on rear
WHEELS/TIRES
-Wheels are USA 6x6 double beadlocks (16.5x12) w/ Jeep logo rock rings
-Tires are 44" Pitbull Rockers (95% + tread - probably only 5-6 rides)
INTERIOR
-Hunsaker wide suspension seats in front (with sliders)
-Factory TJ rear seat
-5 point harnesses in front with quick release
-3 sets of 4 point harnesses in rear
-Tub is completely Rhinolined
-Grant steering wheel w/ quick release hub
-Radio/CD/Ipod/MP3 player w/ 4 speakers
-All gauges, speedo, etc. work
MISC
-Full rollcage mounted to frame in 6 places
-Poison Spyder Crusher corners, sliders, cowl protection
-On board air (rollcage is storage tank w/ 2 quick connects - 1 in front and 1 in rear)
-Rear mounted cargo carrier - easy on/off, carries cooler, tools, etc
-Warn x8000i winch w/ synthetic rope and in-cab controls
-RCI fuel cell mounted behind rear seat
-Rock lights under frame and on front bumper
-Soft doors
-BestTop Half cab top
-Bikini top
-Heater still works great
EXTRAS
-Complete extra 4.0 motor
-Rockwell center chunk
-Driveshafts
-MIsc stuff
DIMENSIONS
-Wheelbase - 116"
-Belly height - 30"
-Overall height - 86"
-Width - 93"
I'm sure there is lots I am forgetting. Feel free to PM me and I would be happy to discuss anything I can about the rig. This thing goes great and has been super reliable, just want to see what else is out there. It has been used and has the battle scars to show it - if your looking for a show queen this probably isn't the rig for you.
Let me know what you got !
Located in Branson, Missouri
Could possibly take it to Superlift for the HogWild Shootout if someone is serious about it. Was going to take the RZR, but plans could change !
Eric
Just looking to possibly change things up a little. Would really like to trade for another 4 seater (NO Cherokees, 4Runners, Blazers, etc). Looking to go smaller but fully built - at least 1 tons, 40's or bigger, V8, auto - in a buggy/juggy or could be full bodied Jeep. May even consider the right 2 seat buggy. This Jeep has been a blast -I just get bored easily and always looking for something different. If I can't find something else, I'll continue to wheel this one !
UPDATE - I really would prefer to trade, but since so many have asked - $21k cash price
On to the details -
1998 TJ (clean Missouri title in hand)
DRIVETRAIN
- 4.0 (cold air intake)
-RH32 tranny (heavy clutches, non lock-up converter, tranny cooler, etc.)
- 203/205 doubler triple-stick transfer case from Wagner Machine
FRONT AXLE
-2.5 ton Rockwell (shaved, hubs flipped, pinion brake, welded, all new seals throughout)
-1350/1410 u-joints
REAR AXLE
-2.5 ton Rockwell steering axle (shaved, hubs flipped, pinion brake w/ line lock for front digs, welded, all new seals)
-1350/1410 u-joints
STEERING
-Full PSC hydraulic system
-Front has 3"x9" ram mounted behind axle for complete protection
-Rear has dual 2"x8" rams
-PSC orbital (4.2 turns from lock to lock)
-PSC rear steer controls mounted in factory e-brake location
-PSC pump and resevoir
-5/8" heims and .25" wall tube on all tie rods
-BTF high steer arms on rear
SUSPENSION
-4-link front and rear
-Frame has been back halved
-1.75" x 3/8" wall DOM lower arms
-1.5" x 1/4" wall DOM uppers
-Front is all Rubicon Express super flex joints
-Rear is Rubicon Express super flex joints on lowers and 7/8" heims on uppers
-Bilstein reservoir shocks on front
-Timbren bumpstops on front
-Limit straps
-ProComp shocks on rear
WHEELS/TIRES
-Wheels are USA 6x6 double beadlocks (16.5x12) w/ Jeep logo rock rings
-Tires are 44" Pitbull Rockers (95% + tread - probably only 5-6 rides)
INTERIOR
-Hunsaker wide suspension seats in front (with sliders)
-Factory TJ rear seat
-5 point harnesses in front with quick release
-3 sets of 4 point harnesses in rear
-Tub is completely Rhinolined
-Grant steering wheel w/ quick release hub
-Radio/CD/Ipod/MP3 player w/ 4 speakers
-All gauges, speedo, etc. work
MISC
-Full rollcage mounted to frame in 6 places
-Poison Spyder Crusher corners, sliders, cowl protection
-On board air (rollcage is storage tank w/ 2 quick connects - 1 in front and 1 in rear)
-Rear mounted cargo carrier - easy on/off, carries cooler, tools, etc
-Warn x8000i winch w/ synthetic rope and in-cab controls
-RCI fuel cell mounted behind rear seat
-Rock lights under frame and on front bumper
-Soft doors
-BestTop Half cab top
-Bikini top
-Heater still works great
EXTRAS
-Complete extra 4.0 motor
-Rockwell center chunk
-Driveshafts
-MIsc stuff
DIMENSIONS
-Wheelbase - 116"
-Belly height - 30"
-Overall height - 86"
-Width - 93"
I'm sure there is lots I am forgetting. Feel free to PM me and I would be happy to discuss anything I can about the rig. This thing goes great and has been super reliable, just want to see what else is out there. It has been used and has the battle scars to show it - if your looking for a show queen this probably isn't the rig for you.
Let me know what you got !
Located in Branson, Missouri
Could possibly take it to Superlift for the HogWild Shootout if someone is serious about it. Was going to take the RZR, but plans could change !
Eric