• Help Support Hardline Crawlers :

99 tahoe ifs to ford dana 60 high pin swap!!

Xtreme 4x4 did one with hp60 and ford 205 and used EOR adapter, it looked so nice that I bought one from them for th400 to ford 205 and it works great
 
Thought about the doubler. What are the benefits of it besides gear reduction?
Already have the 205 and ford 60. And found a 241c with sye cheap, thinking about going that way so speedometer will work.
??? ???
 
Rockwells607 said:
Xtreme 4x4 did one with hp60 and ford 205 and used EOR adapter, it looked so nice that I bought one from them for th400 to ford 205 and it works great
thanks because I made those adaptors for eor
 
McCumbersWV said:
Thought about the doubler. What are the benefits of it besides gear reduction?
Already have the 205 and ford 60. And found a 241c with sye cheap, thinking about going that way so speedometer will work.
??? ???


gear reduction... if you need it? WHat are you gonna use the Tahoe for?

traveler can make you an adapter. You could adapt the VSS to the 205. All it needs is a tone ring and a way to hold the sensor

you could probably get the tone ring and VSS mount made into the tcase adapter
 
I have a 99 two door Tahoe with a 14bolt and Hp60. You will want all of the driveshaft you can get. Easiest is to use a Chevy 241 with a JB Conversion's super shorty sye. The sye and rebuild kit run about $600.
 
Top