blacksheep10
XBJRA champ/ 555 and team Nasty codriver
What do you need chevy related 
Sold/Expired All my stuff
- Thread starter blacksheep10
- Start date
CheapJ7
Mustache rides?
set of 1/2 ton calipers and hoses...
blacksheep10
XBJRA champ/ 555 and team Nasty codriver
gonna cost you, I have a rear disc setup ready to go, brackets tapped, brand new calipers, brand new pads, brand new hoses off camino, all bolted together and ready to weld on. You can sell the brackets I sold you and buy this ****. $120 for all of it or $90 with caliper cores I can take back for the next setCheapJ7 said:
CheapJ7
Mustache rides?
give u a hundo... :afro:
blacksheep10
XBJRA champ/ 555 and team Nasty codriver
with cores, deal.CheapJ7 said:
I have more than that in it with core cost for all brand new **** on brackets. not desperate, but need to move some ****.
CheapJ7
Mustache rides?
$115 and bring it on.... u know my ninja/jew mentality cant let me pay full price for anything....
its a disability... :'(
its a disability... :'(
C
Cole
Guest
I need some 6 on 5.5 hubs, got any? What about stock knuckles?
Bones
That Guy
Kelly selling stuff? He must be serious about building now!
Still have the white Dodge?
Still have the white Dodge?
blacksheep10
XBJRA champ/ 555 and team Nasty codriver
for a 60? I was turning a set down, probably still can.Cole said:
only stock knuckles is one broken ford laughing1
blacksheep10
XBJRA champ/ 555 and team Nasty codriver
use your 14 hubs, the drive flanges for the hubs aren't that much. you sure you want 60 shafts back there? those ears around the ujoint just weren't made for the stresses rears put on them on a big fat girl with lots of throttle.Beyer said:
blacksheep10
XBJRA champ/ 555 and team Nasty codriver
white dodge runs like a striped ass ape again, been driving it this week and last. asking 7500 very negBones said:Kelly selling stuff? He must be serious about building now!
Still have the white Dodge?
Bones
That Guy
Tempting, but I have to sell a Vitara first.blacksheep10 said:white dodge runs like a striped ass ape again, been driving it this week and last. asking 7500 very neg
blacksheep10
XBJRA champ/ 555 and team Nasty codriver
did you look at heath's rear end? Randy will cut a set of 14 bolt splines in rock shafts. Rock joints are unbreakable and the chromo shafts are a grand........longs are a bit more. finding a rock to cannibalize is cheaper than a 60. you put your 14 spindles on the rock knuckle with a plate welded to it with a seal in it. Drive flanges you have ben's or Mad Mac's. Then you have chromo shafts in the rear that will stay together for less money. In reality its maybe a wash, but you have peace of mindBeyer said:I hoped to run Long CV's. Was not aware I could use the 14 bolt hubs. Do you still use the 14 bolt spindle? Do you still use a 60 knuckle?
