Was in the process of building a buggy that has all the right parts do to working out of town a lot I don't have time to finish it and just plain burned out.
Volvo c-303 axles 5.99 ratio with mechanical lockers set up for driver drop
Rear is almost centered diff which is hard to fine front has mounts for trail gear double ended ram and the ram is new with 5 Custom Built MRW bead lock wheels that are 17" rim size $6000 with the ram and trusses on axles with all tabs and brackets for four link set up
Eor 321 chassis seats were mounted engine tranny ans trans and t-case mounts are all fabricated front part of chassis was cut off and remade to fit the axles and motor combo $2500 obo
5.3 cast iron block ls1 intake new ls 1 style water pump and dirty dingo pump spacer with steam port and alternator relocated to be lower 4l60e with brand new atlas 3.0 driver drop t-case
With all adapters short output on the rear and front and rear outputs are 32 spline the atlas is new only ran it on a engine stand to test the tranny for 3 hours
5.3 60,000 miles with all accessory and wiring harness and ECM not flashed $1200 0r $1800 wired and flashed your choice
4L60e has less than 3000 miles since rebuild $600 obo
Atlas transfer case with adapters and box of shifters etc $2500 obo
Liberty hood and grill new fiberglass $550
Have other misc stuff aluminum links with 1.25 heims uppers were mock up links with 3/4 x7/8 heims
Aluminum fuel cell
Brake pedals
Will also trade for another Polaris rzr if it's the right one
Call or text me at 512-923-3495 thanks Terrell or email at [email protected]
Quote
http://m604.photobucket.com/albumview/albums/nhd730/photo-108.jpg.html
Volvo c-303 axles 5.99 ratio with mechanical lockers set up for driver drop
Rear is almost centered diff which is hard to fine front has mounts for trail gear double ended ram and the ram is new with 5 Custom Built MRW bead lock wheels that are 17" rim size $6000 with the ram and trusses on axles with all tabs and brackets for four link set up
Eor 321 chassis seats were mounted engine tranny ans trans and t-case mounts are all fabricated front part of chassis was cut off and remade to fit the axles and motor combo $2500 obo
5.3 cast iron block ls1 intake new ls 1 style water pump and dirty dingo pump spacer with steam port and alternator relocated to be lower 4l60e with brand new atlas 3.0 driver drop t-case
With all adapters short output on the rear and front and rear outputs are 32 spline the atlas is new only ran it on a engine stand to test the tranny for 3 hours
5.3 60,000 miles with all accessory and wiring harness and ECM not flashed $1200 0r $1800 wired and flashed your choice
4L60e has less than 3000 miles since rebuild $600 obo
Atlas transfer case with adapters and box of shifters etc $2500 obo
Liberty hood and grill new fiberglass $550
Have other misc stuff aluminum links with 1.25 heims uppers were mock up links with 3/4 x7/8 heims
Aluminum fuel cell
Brake pedals
Will also trade for another Polaris rzr if it's the right one
Call or text me at 512-923-3495 thanks Terrell or email at [email protected]
Quote
http://m604.photobucket.com/albumview/albums/nhd730/photo-108.jpg.html
