-
Help Support Hardline Crawlers :
Sold/Expired best place to buy a jd2 model 32
- Thread starter hellrzr
- Start date
ROCKRAWL
Well-Known Member
Just curious....are you friends with a guy selling a single seat chassis?
A. YOU PUT THIS IN THE WRONG CATAGORY
B. iF YOU HAVE TO ASK THE DIFF. IN THE TWO DIES YOU SHOULD NOT EVEN THINK ABOUT A RZR CAGE
BUILD A BUMPER oR OTHER NON LIFE sAVING PARTS GET SOME EXPERIANCE FIRST
C. YOU PUT THIS IN WRONG CATAGORY
D. 90 and 180 are degrees the die can bend
E. YOU PUT THIS IN WRONG CATAGORY
GOOD LUCK WITH BUILD
B. iF YOU HAVE TO ASK THE DIFF. IN THE TWO DIES YOU SHOULD NOT EVEN THINK ABOUT A RZR CAGE
BUILD A BUMPER oR OTHER NON LIFE sAVING PARTS GET SOME EXPERIANCE FIRST
C. YOU PUT THIS IN WRONG CATAGORY
D. 90 and 180 are degrees the die can bend
E. YOU PUT THIS IN WRONG CATAGORY
GOOD LUCK WITH BUILD
TBItoy
Well-Known Member
hellrzr said:
And you don't know the difference in a 90 and 180 degree die?
rockingyota
Well-Known Member
- Joined
- Nov 24, 2012
- Messages
- 149
Lol, JustCurious If The Bends Are Tighter With One Or The Other, I've Built About 15 Cages Now So Not New To This
[/quote]
Yea if you dnt know the differance between a 180 deg and a 90 u DO NOT need to try an build a cage. Just save ya money on the bender an pay some to do it for ya
[/quote]
Yea if you dnt know the differance between a 180 deg and a 90 u DO NOT need to try an build a cage. Just save ya money on the bender an pay some to do it for ya
