blacksheep10
XBJRA champ/ 555 and team Nasty codriver
I have a while pile of **** for a bbc I need to get rid of.
-I had a complete 1984 454 with a spun rod and 40k original miles. A guy bought the block, so now I have a lightly spun crank and 1 rod, 7 good rods and pistons, the low milage heads and all the other **** along with it, tin, pumps, intake, probably manifolds, front brackets (prob enough to make a whole set), damper, pulleys, etc.
-I also have a 454 short block that was originally in a V-drive drag boat, then it went in a wheelie truck. It pulled the wristpin out of the piston and windowed the cylinder wall. It didn't go through the outside to the water jacket. It still has the cam, double roller timing set, good crank and 7 good rods, I think 1 good head (pre-79) and a bunch of misc crap off it like pushrods, etc etc. there were some brackets with it too.
-I also have an aluminum intake that is brand new oval port 4 barrel. It is standard car/small truck low deck. Never been bolted on. Don't know what brand, but it is about 100 pounds lighter than the stock one laughing1
-I have 2 366 tall deck heads from the 70's that go with the package
I'm sure I've forgotten something, but there is a huge ass pile of BBC stuff taking up room that needs to go
$200 for the whole pile plus whatever P or whoever is going that way wants to haul it. I'm in PAOLA, KANSAS
other info in sig
I also have a was running 427 tall deck out of our grain truck. it was weak as ****, and got hot if you pulled it hard, so we put a 366 back in its place $500
-I had a complete 1984 454 with a spun rod and 40k original miles. A guy bought the block, so now I have a lightly spun crank and 1 rod, 7 good rods and pistons, the low milage heads and all the other **** along with it, tin, pumps, intake, probably manifolds, front brackets (prob enough to make a whole set), damper, pulleys, etc.
-I also have a 454 short block that was originally in a V-drive drag boat, then it went in a wheelie truck. It pulled the wristpin out of the piston and windowed the cylinder wall. It didn't go through the outside to the water jacket. It still has the cam, double roller timing set, good crank and 7 good rods, I think 1 good head (pre-79) and a bunch of misc crap off it like pushrods, etc etc. there were some brackets with it too.
-I also have an aluminum intake that is brand new oval port 4 barrel. It is standard car/small truck low deck. Never been bolted on. Don't know what brand, but it is about 100 pounds lighter than the stock one laughing1
-I have 2 366 tall deck heads from the 70's that go with the package
I'm sure I've forgotten something, but there is a huge ass pile of BBC stuff taking up room that needs to go
$200 for the whole pile plus whatever P or whoever is going that way wants to haul it. I'm in PAOLA, KANSAS
other info in sig
I also have a was running 427 tall deck out of our grain truck. it was weak as ****, and got hot if you pulled it hard, so we put a 366 back in its place $500
