redneckengineered
Trailer Park Panty Dropper
Parting out my BTF chassis. Parts and prices listed below.
-2004 BTF XXX Chassis with some upgrades done by Wide Open Design in 2009, 1.75" HREW with some 1.5" mixed in, DOM belly and 1/4" wall DOM at link attachment points. Chassis is setup for 2.0 coilovers, 2.0 air bumps front and rear, tons, LS style V8, Th400 & Atlas II or Atlas 4 speed, 1.25" heims all around. Chassis is about 8 years old and is in excellent shape with literally only a few minor dents. I probably missed some specs just post up if you have any more questions. Price includes custom fuel cell, all sheet metal inside and out, engine cradle, and everything else welded to chassis like bumpcans, mounts, etc - $3500
-Klune V 2.7 with custom CTM 300m main shaft, 32 spline input, 32 spline output - $1000 (sold)
-Atlas II 4.3 just rebuilt by Advanced Adapters. Brand new case, all worn or damaged parts replaced with new. Universal shifters, 32 spline f/r, 32 spline input, driver drop, 1410 standard yokes, shorty tailhousing - $2000
-One pair of Fox 2.0 3" travel air bumps - $325
-31x19 aluminum radiator and Taurus fan. Cooled my 480hp LS motor with zero issues - $150
-4 heat treated chromoly lowers (Heretic Fab), 2" x .25", with 1.25" tube adapters (R/L). One pair 35.5", one pair 31.75". One ride on these - $125/ea
-8 teflon lined 1.25" FK heims (JMX16T), jam nuts, and high misalignment spacers for 3/4" bolts (RH thread). Used but in good shape, no rattles, loose balls, etc - $50/ea
-8 teflon lined 1.25" FK heims (JMX16T), jam nuts, and high misalignment spacers for 3/4" bolts (LH thread). Used but in good shape, no rattles, loose balls, etc - $50/ea
-4 standard DOM uppers, 2" x .25" with 1.25" tube adapters (R/L), one pair 33", one pair 29". These are 7 years old but perfectly straight - $50/ea
-2 Beard Ultra seats, neoprene weather resistant fabric, belt sealers - $250/ea
-RJS 4pt harnesses, 3" lap, 2" shoulders - $50/ea
-2 Perma-Cool coolers (one trans, one steering) with 10" fans, 950cfm - $90/ea
All parts are located in the North GA / Chattanooga TN area. Anything shipped will ship from 30742
When chassis was first built:
recent:
interior:
misc:
accumulator mount
dual permacool coolers and mount
front bump mounts
rear bump mounts
motor cradle
-2004 BTF XXX Chassis with some upgrades done by Wide Open Design in 2009, 1.75" HREW with some 1.5" mixed in, DOM belly and 1/4" wall DOM at link attachment points. Chassis is setup for 2.0 coilovers, 2.0 air bumps front and rear, tons, LS style V8, Th400 & Atlas II or Atlas 4 speed, 1.25" heims all around. Chassis is about 8 years old and is in excellent shape with literally only a few minor dents. I probably missed some specs just post up if you have any more questions. Price includes custom fuel cell, all sheet metal inside and out, engine cradle, and everything else welded to chassis like bumpcans, mounts, etc - $3500
-Klune V 2.7 with custom CTM 300m main shaft, 32 spline input, 32 spline output - $1000 (sold)
-Atlas II 4.3 just rebuilt by Advanced Adapters. Brand new case, all worn or damaged parts replaced with new. Universal shifters, 32 spline f/r, 32 spline input, driver drop, 1410 standard yokes, shorty tailhousing - $2000
-One pair of Fox 2.0 3" travel air bumps - $325
-31x19 aluminum radiator and Taurus fan. Cooled my 480hp LS motor with zero issues - $150
-4 heat treated chromoly lowers (Heretic Fab), 2" x .25", with 1.25" tube adapters (R/L). One pair 35.5", one pair 31.75". One ride on these - $125/ea
-8 teflon lined 1.25" FK heims (JMX16T), jam nuts, and high misalignment spacers for 3/4" bolts (RH thread). Used but in good shape, no rattles, loose balls, etc - $50/ea
-8 teflon lined 1.25" FK heims (JMX16T), jam nuts, and high misalignment spacers for 3/4" bolts (LH thread). Used but in good shape, no rattles, loose balls, etc - $50/ea
-4 standard DOM uppers, 2" x .25" with 1.25" tube adapters (R/L), one pair 33", one pair 29". These are 7 years old but perfectly straight - $50/ea
-2 Beard Ultra seats, neoprene weather resistant fabric, belt sealers - $250/ea
-RJS 4pt harnesses, 3" lap, 2" shoulders - $50/ea
-2 Perma-Cool coolers (one trans, one steering) with 10" fans, 950cfm - $90/ea
All parts are located in the North GA / Chattanooga TN area. Anything shipped will ship from 30742
When chassis was first built:
recent:
interior:
misc:
accumulator mount
dual permacool coolers and mount
front bump mounts
rear bump mounts
motor cradle
