kid rok
Well-Known Member
- Joined
- Jul 8, 2007
- Messages
- 1,460
Buggy located in Cumming Georgia. My cell is 770-654-2507 or email me at [email protected].
Asking $18,000 if If go through it.
$15,000 the way it sits.
To make it drivable it needs new trans.
I built this buggy myself. It has mustang hood and grill. I think a 109" wheel base
All the subframe tubing is 1/4 wall and anything else that can hit a rock is 3/16 wall. I'm just under 6' and weigh around 270# and I fit in it very well.
Specs on buggy
Rear 4 link 1" heims top and bottom with a 14 bolt spooled 513
Front 4 link 1" heims on lowers and 3/4 on top with a chevy 60 superior and alloy usa chromoly milled by Branik and long joints. Drive flanges, ARB powered by an air switch and CO2. 513
8"Double ended Howe steering with cooler, res with filter and pump. just under 2 turns lock to lock.
TH350 trans art carr shifter manual valve body.
205 lomax with all the upgrades plus billet retainer and 1410 yokes
6.0 chevy with howell harness and computer flash.Kevco oil pan
14" struts on front and rear
T-Max comp winch with in dash switch.
Master craft large seat on drivers side beard regular seat on passenger side.
Removable storage basket on back.
Moon tank fuel cell
Cnc dual cylinder brakes and cutting brake front and rear.
Odessy battery
39" reds 70-80%, Beadlocks I'm running a low profile tire inside the reds. It works like a staun but better I think.
All skids underneath are uhmw
http://Buggy located in Cumming Georgia. My cell is 770-654-2507 or email me at [email protected].
Asking $18,000 if If go through it.
$15,000 the way it sits.
To make it drivable it needs new trans.
I built this buggy myself. It has mustang hood and grill. I think a 109" wheel base
All the subframe tubing is 1/4 wall and anything else that can hit a rock is 3/16 wall. I'm just under 6' and weigh around 270# and I fit in it very well.
Specs on buggy
Rear 4 link 1" heims top and bottom with a 14 bolt spooled 513
Front 4 link 1" heims on lowers and 3/4 on top with a chevy 60 superior and alloy usa chromoly milled by Branik and long joints. Drive flanges, ARB powered by an air switch and CO2. 513
8"Double ended Howe steering with cooler, res with filter and pump. just under 2 turns lock to lock.
TH350 trans art carr shifter manual valve body.
205 lomax with all the upgrades plus billet retainer and 1410 yokes
6.0 chevy with howell harness and computer flash.Kevco oil pan
14" struts on front and rear
T-Max comp winch with in dash switch.
Master craft large seat on drivers side beard regular seat on passenger side.
Removable storage basket on back.
Moon tank fuel cell
Cnc dual cylinder brakes and cutting brake front and rear.
Odessy battery
39" reds 70-80%, Beadlocks I'm running a low profile tire inside the reds. It works like a staun but better I think.
All skids underneath are uhmw
[img]Buggy located in Cumming Georgia. My cell is 770-654-2507 or email me at [email protected].
Asking $18,000 if If go through it.
$15,000 the way it sits.
To make it drivable it needs new trans.
I built this buggy myself. It has mustang hood and grill. I think a 109" wheel base
All the subframe tubing is 1/4 wall and anything else that can hit a rock is 3/16 wall. I'm just under 6' and weigh around 270# and I fit in it very well.
Specs on buggy
Rear 4 link 1" heims top and bottom with a 14 bolt spooled 513
Front 4 link 1" heims on lowers and 3/4 on top with a chevy 60 superior and alloy usa chromoly milled by Branik and long joints. Drive flanges, ARB powered by an air switch and CO2. 513
8"Double ended Howe steering with cooler, res with filter and pump. just under 2 turns lock to lock.
TH350 trans art carr shifter manual valve body.
205 lomax with all the upgrades plus billet retainer and 1410 yokes
6.0 chevy with howell harness and computer flash.Kevco oil pan
14" struts on front and rear
T-Max comp winch with in dash switch.
Master craft large seat on drivers side beard regular seat on passenger side.
Removable storage basket on back.
Moon tank fuel cell
Cnc dual cylinder brakes and cutting brake front and rear.
Odessy battery
39" reds 70-80%, Beadlocks I'm running a low profile tire inside the reds. It works like a staun but better I think.
All skids underneath are uhmw
Asking $18,000 if If go through it.
$15,000 the way it sits.
To make it drivable it needs new trans.
I built this buggy myself. It has mustang hood and grill. I think a 109" wheel base
All the subframe tubing is 1/4 wall and anything else that can hit a rock is 3/16 wall. I'm just under 6' and weigh around 270# and I fit in it very well.
Specs on buggy
Rear 4 link 1" heims top and bottom with a 14 bolt spooled 513
Front 4 link 1" heims on lowers and 3/4 on top with a chevy 60 superior and alloy usa chromoly milled by Branik and long joints. Drive flanges, ARB powered by an air switch and CO2. 513
8"Double ended Howe steering with cooler, res with filter and pump. just under 2 turns lock to lock.
TH350 trans art carr shifter manual valve body.
205 lomax with all the upgrades plus billet retainer and 1410 yokes
6.0 chevy with howell harness and computer flash.Kevco oil pan
14" struts on front and rear
T-Max comp winch with in dash switch.
Master craft large seat on drivers side beard regular seat on passenger side.
Removable storage basket on back.
Moon tank fuel cell
Cnc dual cylinder brakes and cutting brake front and rear.
Odessy battery
39" reds 70-80%, Beadlocks I'm running a low profile tire inside the reds. It works like a staun but better I think.
All skids underneath are uhmw
http://Buggy located in Cumming Georgia. My cell is 770-654-2507 or email me at [email protected].
Asking $18,000 if If go through it.
$15,000 the way it sits.
To make it drivable it needs new trans.
I built this buggy myself. It has mustang hood and grill. I think a 109" wheel base
All the subframe tubing is 1/4 wall and anything else that can hit a rock is 3/16 wall. I'm just under 6' and weigh around 270# and I fit in it very well.
Specs on buggy
Rear 4 link 1" heims top and bottom with a 14 bolt spooled 513
Front 4 link 1" heims on lowers and 3/4 on top with a chevy 60 superior and alloy usa chromoly milled by Branik and long joints. Drive flanges, ARB powered by an air switch and CO2. 513
8"Double ended Howe steering with cooler, res with filter and pump. just under 2 turns lock to lock.
TH350 trans art carr shifter manual valve body.
205 lomax with all the upgrades plus billet retainer and 1410 yokes
6.0 chevy with howell harness and computer flash.Kevco oil pan
14" struts on front and rear
T-Max comp winch with in dash switch.
Master craft large seat on drivers side beard regular seat on passenger side.
Removable storage basket on back.
Moon tank fuel cell
Cnc dual cylinder brakes and cutting brake front and rear.
Odessy battery
39" reds 70-80%, Beadlocks I'm running a low profile tire inside the reds. It works like a staun but better I think.
All skids underneath are uhmw
[img]Buggy located in Cumming Georgia. My cell is 770-654-2507 or email me at [email protected].
Asking $18,000 if If go through it.
$15,000 the way it sits.
To make it drivable it needs new trans.
I built this buggy myself. It has mustang hood and grill. I think a 109" wheel base
All the subframe tubing is 1/4 wall and anything else that can hit a rock is 3/16 wall. I'm just under 6' and weigh around 270# and I fit in it very well.
Specs on buggy
Rear 4 link 1" heims top and bottom with a 14 bolt spooled 513
Front 4 link 1" heims on lowers and 3/4 on top with a chevy 60 superior and alloy usa chromoly milled by Branik and long joints. Drive flanges, ARB powered by an air switch and CO2. 513
8"Double ended Howe steering with cooler, res with filter and pump. just under 2 turns lock to lock.
TH350 trans art carr shifter manual valve body.
205 lomax with all the upgrades plus billet retainer and 1410 yokes
6.0 chevy with howell harness and computer flash.Kevco oil pan
14" struts on front and rear
T-Max comp winch with in dash switch.
Master craft large seat on drivers side beard regular seat on passenger side.
Removable storage basket on back.
Moon tank fuel cell
Cnc dual cylinder brakes and cutting brake front and rear.
Odessy battery
39" reds 70-80%, Beadlocks I'm running a low profile tire inside the reds. It works like a staun but better I think.
All skids underneath are uhmw
