51Jeepwillys
Well-Known Member
Putting the buggy up for sale. Not hurting to sell it but will give it a try. Its located in Sanger, TX 76266. Will help with delivery within reason. Asking $14,000 OBO, would also make a package deal with a 18' performance car hauler for another $1300. But wont sell trailer till buggy is gone. If your interested send me a pm and ill send my number. I know im forgetting stuff on it but will answer all questions. Not really looking for any trades but would consider partial trades. Let me know what you got.
It has a 115" wheel base, 19" belly, 73" tall, 47" wide
Chassis:
-1.75" HREW, 4 linked front and rear w/ 2" DOM tube, 18" SAW air shocks in front w/ limit straps, 16" Fox air shocks in rear w/ limit straps. A person 5'9" would be ok in this chassis. Anyone bigger would take a little rework.
Drivetrain:
-Chevy 4.3 on propane w/ MSD Ignition w/ alum rad w/ electric fan
-TH350 w/ Lokar shifter and cooler w/ electric fan(it has some noise in it but works just fine, will run it till it finally breaks then get it rebuilt)
-Yota doubler w/ 23 spline 4.7 gears in back case w/ triple sticks, chromo input on the front case.
Axles:
-Front Axle is a Chevy D60, DRW, KP, 4.10's, welded, D44 brake conversion, Yukon shafts, ECGS 35 spline drive slugs, TSC SE ram, Yota flange
-Rear Axle is a Ford D60, DRW , HP, KP, 4.10's, welded, D44 brake conversion, Yukon shafts, ECGS 35 spline drive slugs, PSC SE ram, Yota flange, Solid diff cover
Tires/wheels:
-43x14.5x17 TSL/SX non sticky(Brand new, just put them on today)
-Dodge steel wheels
Misc:
-Pyle radio w/ 4" marine speakers and tower speakers
-Mile Marker 8K winch tied into switch panel
-30" LED Light bar
-20" LED Light bar
-Corbeau Seats w/ RJS Harnesses
-12v Guy Switch Panel
-Quick connect steering wheel
-storage rack to hole a little bag and a Yeti Roadie cooler
-2 propane tanks
-Ruff Stuff 3 light bar(LED brake/tail lights and blue running light)
-Opt red top battery
-UHMW skids
-Surplus Center electric pump to run rear steer w/ switch
It has a 115" wheel base, 19" belly, 73" tall, 47" wide
Chassis:
-1.75" HREW, 4 linked front and rear w/ 2" DOM tube, 18" SAW air shocks in front w/ limit straps, 16" Fox air shocks in rear w/ limit straps. A person 5'9" would be ok in this chassis. Anyone bigger would take a little rework.
Drivetrain:
-Chevy 4.3 on propane w/ MSD Ignition w/ alum rad w/ electric fan
-TH350 w/ Lokar shifter and cooler w/ electric fan(it has some noise in it but works just fine, will run it till it finally breaks then get it rebuilt)
-Yota doubler w/ 23 spline 4.7 gears in back case w/ triple sticks, chromo input on the front case.
Axles:
-Front Axle is a Chevy D60, DRW, KP, 4.10's, welded, D44 brake conversion, Yukon shafts, ECGS 35 spline drive slugs, TSC SE ram, Yota flange
-Rear Axle is a Ford D60, DRW , HP, KP, 4.10's, welded, D44 brake conversion, Yukon shafts, ECGS 35 spline drive slugs, PSC SE ram, Yota flange, Solid diff cover
Tires/wheels:
-43x14.5x17 TSL/SX non sticky(Brand new, just put them on today)
-Dodge steel wheels
Misc:
-Pyle radio w/ 4" marine speakers and tower speakers
-Mile Marker 8K winch tied into switch panel
-30" LED Light bar
-20" LED Light bar
-Corbeau Seats w/ RJS Harnesses
-12v Guy Switch Panel
-Quick connect steering wheel
-storage rack to hole a little bag and a Yeti Roadie cooler
-2 propane tanks
-Ruff Stuff 3 light bar(LED brake/tail lights and blue running light)
-Opt red top battery
-UHMW skids
-Surplus Center electric pump to run rear steer w/ switch